How to:Clean Full ASSYST Memory for W211 W219 and more.

[zhvepes]

I tried it and das dev can do only 2004 year manufacture.

Does anybody knows how to reset assyst in earlier models?

[Bazil_mb]

Hello,
Try to reprograming CGW, in control unit adaptation. After this try to reset assyt

[samyboy]

tryed it and it works great , but i think only on mercedes cars that stors assyst and assyt+ in CGW , but newer models that stores assyst and assyst+ in instrument cluster doesnt work so i think there must be a way to clean assyst with DAS in newer vars like 2009 c350 body w204 , does anybody have a way to do it ?

[testariauto]

I have a E class w 211.006, and i have service memory full, but in the past it was changed odometer, and in service memory appears a service with strange character....
My problem is : If y reset CGW with Qrius procedure, in dashbord will appears the right km or it still keeped the actual value
Thx

[samyboy]

I have a E class w 211.006, and i have service memory full, but in the past it was changed odometer, and in service memory appears a service with strange character....
My problem is : If y reset CGW with Qrius procedure, in dashbord will appears the right km or it still keeped the actual value
Thx

qrius procedure will deleet all services in CGW , this got nothing to do with your mileage in speedometer ,the mileage will stay the same and service will be service A in 20000 km

[testariauto]

I have try in dev mode with das simulation, and for Program control unit i have only 2 variants in selection:

v13.04.03.24_taxi_ab_A''J03/x, Taxi-datenstanz ab SW-release 01.02.00
and
v13.04.03.24_taxi_ab_A''J04/1,Taxi-datenstanz ab SW-release02.00.00

I think is not the right coding because this car is not a taxi car.
I insist on this problem because i don't have enough experience with star and i don't want to destroy something.
thanks in advance

[mercis]

this is not coding,only flash
and work

[samyboy]

I have try in dev mode with das simulation, and for Program control unit i have only 2 variants in selection:

v13.04.03.24_taxi_ab_A''J03/x, Taxi-datenstanz ab SW-release 01.02.00
and
v13.04.03.24_taxi_ab_A''J04/1,Taxi-datenstanz ab SW-release02.00.00

I think is not the right coding because this car is not a taxi car.
I insist on this problem because i don't have enough experience with star and i don't want to destroy something.
thanks in advance

doesnt matter wich option you use either one , if your car doesnt support that option,DAS will not let you contenue procedures , then you chose your other option ,
done this about 10 times already and never had any problem ,
trust me Qrius he KNOWS what hes talking about all credit goes to him

[testariauto]

Is not a problem of trust, but i want to be sure that the car will run after that...thanks again.

[testariauto]

it worked perfectly, but then needed to reset and also assist.
many thanks

[vvvl10]

many thanks mate,is wery helpfull info

[EUROLUXURYINC]

Fantastic forum ,thanks all for great contribution.

[kashalot]

Maybe someone knows or can give a hint how to describe virgin ZGW of a W211 2007 again?

[pepi]

At newer of w211 models be ware this solution can cause oil light fault.
I always make an backup of CGW before I reset.

Sent from my SM-G975F using Tapatalk

[kashalot]

There are no oil light fault, and unfortunately I didn't make any back-up. Now the mileage and everything else is at zero.Someone knows how to enter it with Xentry DAS.