Remote work but failed to start, the dashboard show IMOBILISER ACTIVATED
Insert the key again, DO NOT TURN ON the ignition, wait for a few minutes and retry to start
Tuareg 2006 AKL from auction
I Bridged the fuses and read the pin and CS from ECU precoded XH key and programmed to the car with VVDI2
remote work ESL release but car won't start with immo message on the dash
After that I tried 7936 precoded to VW with XH after that precoded with CS and programmed - ESL release but the car won't start and immo error is still on the dash
I can't see sign of ECU or other parts replacement
Any ideas?
Remote work but failed to start, the dashboard show IMOBILISER ACTIVATED
Insert the key again, DO NOT TURN ON the ignition, wait for a few minutes and retry to start
Last edited by vialli; 22nd September, 2021 at 08:02 PM.
I alway make key by dump for Touareg + Cayenne even add key. Key DIY work too by multifunction NB.
If Kessy Siemens, just read 93C86 and Tango, VVDI2 work perfect.
Conti kessy, need VVDI prog (in circuit) + VVdi2
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
glad u sorted, always leave ign on 5mins after learn with these,
Tools owned -
AD100 PRO, Lonsdor, FVDI 18, FVDI 20, VVDI PROG, VVDI2, VVDI MB
CGDI BMW, SuperVag, Renault ECU tool, OBDstar X300 DP Plus, AUTEL im508
VVDI Mini Keytool, KeyDIY KDX2, SBB, ACDP CAS/KVM
Opcom, VCDS pro, Diagbox, Multiecuscan, Forscan, JLR SDD
Bookmarks