Any software that can show the wiring scheme on this model to try to find it?
Code box - 89784-28011
Estima 2009 smart key Japan Import - After battery replacement the car won't switch ingnition on keyless or emergency
I read the smart box by OBD and programmed the emulator with Tango and Autel - both emulators switch ignition ON but red immo light blink and can't start the car or program the keys
I think that the car lost synchronisation betwen smart box and ID code box
I took out the dash cover and found the smart box but can't find ID code box
looks like is not possible to be behind the heater like on Yaris - on some scheme show behind the stereo but its not there
Any ideas?
Any software that can show the wiring scheme on this model to try to find it?
Code box - 89784-28011
I found it behind the heater like on Yaris but on Yaris is very easy than this - Never will take again job like this
For Toyota AKL, i charge 6hrs labor instead the key programming
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
Estima smart key is easy job AKL
The problem with this one is that after flat battery lost the synhro somewere
Today I checked ID box to Smart box is OK
Next time I must check ID box to Engine ECU but the Engine ECU again is on the place like 3 hours labor
After that I will need minimum 6 hours to put evriting back - never will take Estima with problems again - now Yaris AKL looks like children game
godfathertwo (29th September, 2021), keturi (19th October, 2022), lion0304 (29th September, 2021)
Bookmarks