FORD Focus 1.8tddi PSG 5 problem after replacement electronic of pump

**nikitoo123** · 9th October, 2021, 10:30 PM

Hi, I have problem with my focus mk2 2000year. Last day i drove and the car went out on the move.I have lunch x431 and i read DTC P1564 and P1664 DTC were not erased.I know this pump PSG5 VP44 have problem with Electronic unit. I decided to buy a second hand pump with the same number and use only the electronic unit.But now the car doesn't want to start again and i have P1563 and P1664 but now they are erased. Ð¢his second hand electronic unit was likely to be defective.

**castin** · 10th October, 2021, 09:01 AM

ELM327 + Forscan (one year licence = 15$) or trial (free for 14day) - job done.

**pawl** · 10th October, 2021, 12:41 PM

immo is blocking ,the lamp flashes quickly ?

**nikitoo123** · 10th October, 2021, 09:35 PM

Yes I have elm327 and i have Forscan with licens. I open PATS programing and click Module Inizialization and I follow procedure and after 10 min I have error ,,Module inicialization is not completed,, Why??

**pawl** · 11th October, 2021, 07:18 AM

hello there you have two procedures use the time delay

**castin** · 11th October, 2021, 07:35 AM

Originally Posted by nikitoo123

Yes I have elm327 and i have Forscan with licens. I open PATS programing and click Module Inizialization and I follow procedure and after 10 min I have error ,,Module inicialization is not completed,, Why??

Yes, chceck power suply (must use battery charger), last step is circle ignition ON/OFF - try many times.