Audi A6 allroad 2002 level control

[alclot]

There are two MCU`s XC68HC912D60, one on front side and the other on the rear side .

You can repair the suspension module by writing the flash and the eeprom in both MCU`s.

I attached the last software 4Z7 907 553 F .

The module used was 4Z7 907 553 A and now works with 4Z7 907 553 F software and works perfect .

Enjoy .

Hi mate,
Firts thanks a lot for the dumps.
I need your help here. I cant program flash by xprog. I tried to erase before but when I writer after give me errors on verifing.
Can you give a advice how to do it?
I tried too by vvdi but flash get only 60kb and no 2mb.
Thanks a lot

[Xiri1968]

I have the same problem...

[Xiri1968]

please I have the same problem

[Sziri]

I try,
thanx

[Razius]

i know how to repair this unit
contact me on PM

Hello
Your inbox is full can not send you message, maybe you could write me how to do this?
Thank you

[epicsabi]

Thank you...

With your dumps I fixed an Allroad with same fault.


I changed only the front eeprom.

My HW: 4Z7907553A

[Sacumbe]

Hi all,

Anyone knows if The 4Z7 907 553A is compatible with the 4Z7 907 553 G? My "A" has the 65535 error and i saw a G module applied in a 2001 Allroad. Thanks in advance

[garageozcar]

i can repair file easyly

[DECOCO]

i can repair file easyly

can you help me with front eeprom? dtc
4Z7 907 553 A 2001 audi a6
thank you

[Radzio918]

I have a damaged eeprom probably in the controller from audi A6 C5 allroad. Can anyone help me how to connect it to the UPA programmer? where is vcc vss bkgd reset and extal

IMG_20241218_165822.jpg