Lucas epic pump

**ristici** · 11th May, 2012, 03:29 PM

hi,

i need help to solve rotor position error. i have read eeprom memory and i have found that rotor minimum is on 0022h, 0023h adress and maximum on 0024h, 0025h. From my dump minimum is 330,5 - maximum 745. i use this formel:

hex value= dez value/2

can someone help me to perform this calibration?

**alfabit** · 11th May, 2012, 03:33 PM

Search around here, there are some guys who have the same problems as you, they wrote a piece of sw for Lucas epic pump .

**ristici** · 12th May, 2012, 11:05 PM

Originally Posted by alfabit

Search around here, there are some guys who have the same problems as you, they wrote a piece of sw for Lucas epic pump .

no one will help

**alfabit** · 13th May, 2012, 08:04 AM

Originally Posted by ristici

no one will help

I found something for you, so are some who will help...
That sw i never use it, but that NT is very useful, mechanics use that method of reparation with great success.

**dilick** · 13th May, 2012, 08:13 AM

hi guys is there any s/w or help files to repair Lucas Epic pumps installed on MB W202 C200/C220/E200/E220?
thanks

**ristici** · 13th May, 2012, 08:34 AM

Originally Posted by alfabit

I found something for you, so are some who will help...
That sw i never use it, but that NT is very useful, mechanics use that method of reparation with great success.

alfabit you are the man!

for me is sw more interesting solution...sw change some data but i don't know what, now i must find the uses of this data

best regards

**ristici** · 13th May, 2012, 08:41 AM

and 4737A english

**alfabit** · 13th May, 2012, 09:58 AM

Originally Posted by ristici

for me is sw more interesting solution...sw change some data but i don't know what, now i must find the uses of this data

Maybe the author of that sw read this and explain us thorough what the sw is doing, i understood when i found that sw it is doing electronically the NT4737 is explaining doing mechanically.
I never used it, enough to do exactly NT4737 is saying, simple and efficient.

**ristici** · 14th May, 2012, 04:04 PM

i have try calibration with this sw but no succes, now i have pump ecu error...this pump make me crazy

**alfabit** · 14th May, 2012, 04:51 PM

Originally Posted by ristici

i have try calibration with this sw but no succes, now i have pump ecu error...this pump make me crazy

Don`t blame me !

That sw is not written by me !

I solve this - not me, but my friends mechanics come with that problem to me calling for reprogram the flash in the pump, i give them that factory note technique NT4737. This is for them, turning nuts and bolts !

**ristici** · 14th May, 2012, 07:41 PM

Originally Posted by alfabit

Don`t blame me !

That sw is not written by me !

I solve this - not me, but my friends mechanics come with that problem to me calling for reprogram the flash in the pump, i give them that factory note technique NT4737. This is for them, turning nuts and bolts !

i don't blame you! i want only to say that sw is not good solution for my problem with this pump

best regards

**ristici** · 14th May, 2012, 07:43 PM

with original dump i have no pump ecu error

**lalanirina** · 19th May, 2012, 05:39 AM

what is the pb of the car, if there are error in pompe rotor position because solution depend of the car pb may be ou can solve it mechanical may be by electronical

**javierfichera** · 3rd August, 2012, 06:38 PM

This soft work perfectly.
TKs.

**primerochevy** · 2nd November, 2021, 08:06 PM

[QUOTE = ristici; 1554567] hola,

necesito ayuda para resolver el error de posición del rotor. He leído la memoria eeprom y he descubierto que el mínimo del rotor está en la dirección 0022h, 0023h y el máximo en 0024h, 0025h. De mi volcado mínimo es 330,5 - máximo 745. Yo uso este formel:

valor hexadecimal = valor dez / 2

¿alguien puede ayudarme a realizar esta calibración? [/ QUOTE]

hola, con q soft lo lees q te aparecen las filas 0022h 0023h ... la dirección 0022h, 0023h y el máximo en 0024h, 0025h, a micon el asprogramer no me las muestra esas filas, saludos