Hyundai Tucson SIMK43 IMMO OFF

**miki18** · 24th November, 2021, 05:12 PM

Hello.

Tucson 2.0 gasoline MY2006
ECU SIMK43 5WY1963C
39171-23270
39181-23270
FC7M
Memmory AM29F400BB

Can someone please remove IMMO from this file?
It is AM29F400BB read by programmer.
Please fix also checksumm

Thank you
Best regards
Marko

**rafal** · 24th November, 2021, 05:16 PM

here...............

**miki18** · 24th November, 2021, 05:26 PM

Thanks for help.

Is this file ok to write ?
There is a lot data missing if I compare files.
I read this directly with programmer (unsoldered chip)

Car is far away from me....

Is this file for direct programmer writing?

Thanks

**rafal** · 24th November, 2021, 05:33 PM

it is your file off + crc
car far away - you are funny
if car away - why are you taken this job even not possible to do by self ?

**miki18** · 24th November, 2021, 05:38 PM

Thanks for info.

I wil write it.

Why funny ?

Car died about 150km from here... I just have ecu. (smartra died)

**rafal** · 24th November, 2021, 05:41 PM

Originally Posted by miki18

Thanks for info.

I wil write it.

Why funny ?

Car died about 150km from here... I just have ecu. (smartra died)

do you know what is this:

**miki18** · 24th November, 2021, 05:46 PM

Thank you again.
I will let you know if all went ok.....

P.S.
This was easyer

**miki18** · 26th November, 2021, 01:59 PM

Hello again.

This file didn't work :-(
Car doesn't start and parameters are all screwed up.... RPM 1620 () voltage 0.2 V....

**caliskan71** · 26th November, 2021, 02:18 PM

Tested file in here
https://dropmefiles.com/H2dFf

**miki18** · 26th November, 2021, 08:51 PM

Thanks for file.
This one is not from my car....
What progreammer was used for this.
I don't have obd programmer this was read by advantech programmer (desoldered)
I have ktag programmer but I don't have connection photos..

**tech_cz** · 29th November, 2021, 10:13 AM

Try this:

CKS fixed by OLS.

WBR, Marek

**miki18** · 29th November, 2021, 10:39 AM

Thank you for file.

I programmed this file and when I connect to ecu on bench I have Smartra DTC P1690.
Will this car start ?
If I know correctly Smartra module has to be disconnected.