Hello to all!
I have a Porsche Boxster 986 2.7 with DME7.8 ecu (0261206579 - 99661860400) with engine and ecu replaced. I have swapped the 5P08C3 from old ecu but now the car start but has adaptation problems. To swap only the immo byte someone know what they are?
Regards
Last edited by rrrst; 27th November, 2021 at 11:29 PM. Reason: add old file
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Old file added
Only eeprom is not enough. You need full eeprom + flash
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
I don't need immo off. I only need to invert the immo's bytes in the files
test this file
https://mega.nz/file/crxS2BjJ
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
rrrst (28th November, 2021)
kiszka (28th November, 2021)
Bookmarks