fiat panda 100hp key number and security code

[dkenny]

hi

can anyone help with a keycode number and security code for a fiat panda 100hp 2007 or is the only option to get the info from the dealer?

cheers

[rapidlocksmiths]

Lishi Sip22 2in1 pick and decoder will very quickly decode the correct key

most good programmers even some chinese ones will read the security code

but even once you have these you will need to prepare precode data from the bcm to the transponder before you can program it , again most good tools display the security code once the precode data has been extracted from the system and the key has been prcoded.

the dealer can supply the key number and the security code , but you will also have to order the precoded key from them if you dont have kit to read this from the vehicle

if you do have the kit to program the key then you should also be able to extract the pin code and precode the key

so best solution is lishi to pick and decode the lock , then a decent kit to precode the key and extract the security code.

other option is to order key pre cut and precoded from dealer with security code

[dkenny]

Lishi Sip22 2in1 pick and decoder will very quickly decode the correct key

most good programmers even some chinese ones will read the security code

but even once you have these you will need to prepare precode data from the bcm to the transponder before you can program it , again most good tools display the security code once the precode data has been extracted from the system and the key has been prcoded.

the dealer can supply the key number and the security code , but you will also have to order the precoded key from them if you dont have kit to read this from the vehicle

if you do have the kit to program the key then you should also be able to extract the pin code and precode the key

so best solution is lishi to pick and decode the lock , then a decent kit to precode the key and extract the security code.

other option is to order key pre cut and precoded from dealer with security code

ok cheers

i dont actually do locksmithing

the lad i use though said that its a lot easier to get they key number and cut from that as picking is a pain im led to believe!

cheers

[rapidlocksmiths]

picking and decoding the sip22 lock with lishi takes under 2 minutes on the door lock , so not sure why a pain . its a 20 minute job tops to pick and decode and extract data and code key with correct kit.

sip22 is one of the easiest locks to pick and decode .

[dkenny]

how much for you to do the job?

im in coventry

[dkenny]

picking and decoding the sip22 lock with lishi takes under 2 minutes on the door lock , so not sure why a pain . its a 20 minute job tops to pick and decode and extract data and code key with correct kit.

sip22 is one of the easiest locks to pick and decode .

how much and when can you do it?

cheers

[rapidlocksmiths]

i dont travel to coventry , but i know 2 people who do , try phil at PT auto locksmith specialists who is based in tamworth , or ian who is a good member here username Ninja123 or google remote key man oldbury, both excellent locksmiths who will both make very short work of this car

[castin]

And next problem is Remote prepare data for PCF7941. Only TMPro2 can prepare it corretly.

[rapidlocksmiths]

And next problem is Remote prepare data for PCF7941. Only TMPro2 can prepare it corretly.

at least 1 of the people ive referred him to above has TMPRO , i suspect both will have it , they are both well equipped with kit and stock.