Opel Zafira 2013 immo data from bsi load in engine delco e83

[bsv2001]

Hello
Can somebody help reload immo data from BSI 24c16 to Delco E83 (A16XER) ECU
Thanks in advance

[miroopel]

Е83 pin code 2608
BSI pin code 8162

[bsv2001]

Thanks But need reload manually immo data in ECU E83 delco (old ecu was damaged- not possible to read)
With pin have dts: key not programmed in ECU Delco E83 (E83 virgin with old key, program ECU with new PIN as in BSI, erase and program key with BSI PIN)

[brend]

Thanks But need reload manually immo data in ECU E83 delco (old ecu was damaged- not possible to read)
With pin have dts: key not programmed in ECU Delco E83 (E83 virgin with old key, program ECU with new PIN as in BSI, erase and program key with BSI PIN)

About if original ecu in opel damage and clon not possible...............

You have for this opel only standart option , all job pin code away !

In opel no bsi it's no psa group , it's opel and in here bcm .

[bsv2001]

Sorry BCM ( not BSI but think is not important in thise case)
After all manipulation with pin code in e83 delco:
1 Virgin E83 ecu with old pincode
2 Program new pincode from bcm to Delco e83 ecu
3 Program new VIN in e83
4 Erase and programm key

Now: BCM accept key
E83 delco have dtc: Key not program -- and engine start on 2s and stop
How solve this is dts in ECU - May be another way to programm wiyj PIN
or only sps ??
Thanks

[brend]

Sorry BCM ( not BSI but think is not important in thise case)
After all manipulation with pin code in e83 delco:
1 Virgin E83 ecu with old pincode
2 Program new pincode from bcm to Delco e83 ecu
3 Program new VIN in e83
4 Erase and programm key

Now: BCM accept key
E83 delco have dtc: Key not program -- and engine start on 2s and stop
How solve this is dts in ECU - May be another way to programm wiyj PIN
or only sps ??
Thanks

You can't fix this immo dump away.
Like i said all job pin code away , that's it .

If not work , so...........check what you to do is wrong , that's it .

[miroopel]

Sorry BCM ( not BSI but think is not important in thise case)
After all manipulation with pin code in e83 delco:
1 Virgin E83 ecu with old pincode
2 Program new pincode from bcm to Delco e83 ecu
3 Program new VIN in e83
4 Erase and programm key

Now: BCM accept key
E83 delco have dtc: Key not program -- and engine start on 2s and stop
How solve this is dts in ECU - May be another way to programm wiyj PIN
or only sps ??
Thanks

I had the same problem with E83: the key is not programmable. I did not find a solution. The SPS will not solve the problem. What tool are you using?

[bsv2001]

Abrites New op com
May be somebody have working BSI+delco e83 dump from similare car?

[miroopel]

.................

https://www.digital-kaos.co.uk/forum...62-VIRGIN-ABUX

EDIT: Read post 5

[filutek]

Yes of course ........

ZAFIRA????
ECU:
Holden
2014
TRAX
1.8L (2H0)

BCM:
Opel
2013
INSIGNIA
1.8L (2H0)

[bsv2001]

thanks for all
will try soon

[brend]

thanks for all
will try soon

And of course we all wait report from you about member filutek sulution's...........................

[filutek]

Car never start if ECU oryginal 1.6L and purchased ECU 1.8L.
SPS or flash reprog.

Ps.: I have done adding ecu and bcm many times.

[12manux]

Make SPS with globaltis and program with pincode from this topic.