xprog read out B84N MC68HC11A1

**el_futte** · 12th February, 2010, 05:18 PM

i have tryed 2 read out my B84N MC68HC11A1 from a peugeot 106 rally what family is this chip in i cant find it on device programmer desktop

and my progam just says device silenc ore bootloader error

**Zmann** · 13th February, 2010, 03:46 AM

Try with the menu of A8, probably the old one. The difference amoung these two are the EPROM content which should not affect to the programming.

**el_futte** · 13th February, 2010, 07:30 AM

argg my programmer xprog-t just says device silence and also whit a hc11f1 mcu

**pinch** · 13th February, 2010, 12:43 PM

I get device silent trying to read E59B MC68HC11KA4 QFP64, I have desoldered it and try to read it with xprog-t ,have also tried to read it in circuit, no sucess.
Have you sucessed to read any MCU with your xprog-t ?

**geniehex** · 13th February, 2010, 12:49 PM

Originally Posted by pinch

I get device silent trying to read E59B MC68HC11KA4 QFP64, I have desoldered it and try to read it with xprog-t ,have also tried to read it in circuit, no sucess.
Have you sucessed to read any MCU with your xprog-t ?

HELLO
If you desolved the mcu you must add a cristal 4mhz or 8mhz!!

**djdansmart** · 13th February, 2010, 01:08 PM

Also if you read in circuit be shure quartz from pcb is same as xprog software settings! In other case you need to setting from xprog software!

**pinch** · 13th February, 2010, 01:19 PM

With the xprog it came a adapter for for HC11A8/E1/E9/E20/EA9, could I use that for the KA4 ?
It has a 8Mhz crystal on it.
How do I check the quartz from PCB ?

Regards

Added a pic of the PCB in question.

**el_futte** · 13th February, 2010, 05:27 PM

no any luck there is a crystal whit the adapter there is follow 2 the device.. there is 7pcs adapter whit it ..

**el_futte** · 13th February, 2010, 05:39 PM

its this one i have

Telwis.pl: XPROG-T HC12/HC11/HC08/HC05 Programmer [FULL SET]

**pinch** · 13th February, 2010, 07:11 PM

I have the same.
HC11A8/E1/E9/E20/EA9 is the only QFP64 adapter for HC11.
I dont know if it works for KA4

**el_futte** · 13th February, 2010, 07:13 PM

i have adapter hc11f1 and chip 2f37e its just says silence grrrrrrr

**emekelektronik** · 13th February, 2010, 07:15 PM

Try other programmer!

**el_futte** · 13th February, 2010, 07:25 PM

oder programmer??

**el_futte** · 13th February, 2010, 07:26 PM

arg you mean Other programmer.. the first i have was xprog-m that dont work now this... and its not work eather

**pinch** · 13th February, 2010, 07:29 PM

I didnt even get mine to read the X24C01 either....
is this programmer s**t ?
How many do you have to buy to get a working one ?
Have you managed to read anything with yours ?

Thread: xprog read out B84N MC68HC11A1

Thread Tools

Display

xprog read out B84N MC68HC11A1

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions