307 bsi virgin dump

**jjrp255630** · 31st July, 2010, 12:12 PM

hi, i have the eeprom corrupt, can post eeprom virgin?
or i can put to FFF eprom and write virgin mcu and program with pp2000?

**Digital Auto's** · 9th September, 2010, 01:05 PM

Originally Posted by cammy25

Sorry for late reaction mate

But last file is ok ,I always change ID too for PPS2000, that it recognise right BSi.

Cammy, can you explain this further. I just used Ezber's file and it worked o.k but PPS was struggling to id it. Can you file be used freely or is it tailored to adams original (ie. mileage etc)

Thanks

**cammy25** · 10th September, 2010, 07:16 AM

yes

3 things are important :
-checksum
-mileage
-ID

- the upper block is always same so checksum is same for vigin.
- mileage can be set to 0 and can be in different addres in different versions.
- ID (actually part number) must be same ,else some configurations will be written in wrong addres. And PPS will have troubles autodetect version.

**Digital Auto's** · 10th September, 2010, 09:48 AM

Thanks Cammy, thats cleared things up. Out of curiosity you don't know whats stored in the main (128k) flash memory. Is it part of the running software or are config options etc in there. Was tempted to go in but didn't want to mess the job up....

**cammy25** · 10th September, 2010, 02:10 PM

Not any config is in flash. I mean programmable config.In this case it's static

Ofcourse it's written and compiled especially for the board version.
So flash is not always the same and can have different components connected to in/outputs. But thats up to the developers to sort out.

**magnacin** · 28th October, 2010, 07:22 PM

Hi,
Can somebody pleas ehlp me by providing a virgin bsi dump for a 307 with 95160 memory.
I also need a 307 virgin ECU for a IAW 6LP1.18 ECU so I can match both and telecode with PP2000
Enclosed are the files

Thanks in advance.

**Ezber_Bittar** · 29th October, 2010, 04:14 AM

say thks

enjoy............................................. ......!

**vanos batam** · 29th October, 2010, 11:40 AM

Originally Posted by magnacin

Hi,
Can somebody pleas ehlp me by providing a virgin bsi dump for a 307 with 95160 memory.
I also need a 307 virgin ECU for a IAW 6LP1.18 ECU so I can match both and telecode with PP2000
Enclosed are the files

Thanks in advance.

what years

**vanos batam** · 29th October, 2010, 02:06 PM

Originally Posted by adam28

Alright lads

Is there anyone out there who can make this BSI virgin for me please?
Its from a 2001 reg 1.6 peugeot 307 with a HC912DG128 chip inside.
Does not seem to be any software that supports 912 to make it virgin,only the 95160.

Much appreciated.

thankyou..!!
it working 100% with my BSI

**magnacin** · 29th October, 2010, 03:41 PM

Thanks a lot.
Will try, and if not working let you know.

**mobil72** · 17th November, 2010, 11:34 PM

I have problem with Peugeot 307 2001. After changing mileage BSI was damaged and I must replace it.
Can somebody send me virginized eeprom for MC912DG128, please.

**eleeinidis** · 15th December, 2010, 08:30 AM

Originally Posted by mobil72

I have problem with Peugeot 307 2001. After changing mileage BSI was damaged and I must replace it.
Can somebody send me virginized eeprom for MC912DG128, please.

Dear friend try this file . It works fine but then it needs to program the electric windows etc . it is virgin.

**centrohifi** · 30th May, 2011, 09:39 PM

I program keys, with new transponder? if indeed Ori Pin Code!? or good old key.........

**maucontacto** · 7th June, 2011, 11:10 AM

Hello!!!

A friend of mine that works in a Peugeot dealer ask me to repair this BSI. The car came with no data on this unit not starting. After that someone inside programe an incorrect VIN and PIN code. At the moment we need a reseted file to start a fresh instalation.

BR