MB Sprinter EIS part number interchangeable?

[mjoesen]

Hello!

I need to adapt a new/used EIS to a MB Sprinter W906 2011. Cars EIS has the number: A 906 905 06 00 on it, but I cannot find any other EIS available to buy with that number. Do any of you know if any EIS from a W906 from year 2011 will fit?


Many thanks.EIS.jpg

[bersch8688]

Look on ebay

[schouten1977]

changed manny sprinter ezs already didnt look at number

[dialamoby]

changed manny sprinter ezs already didnt look at number

just read data from old eis, and write to the new one, any w906 eis,, only issue i had was the abs light came on, which im still trying to figure out reason,,, ANY ADVICE,,, ?

[cl55]

just read data from old eis, and write to the new one, any w906 eis,, only issue i had was the abs light came on, which im still trying to figure out reason,,, ANY ADVICE,,, ?

because the type of abs is different, which is written in eis coding

[mjoesen]

because the type of abs is different, which is written in eis coding

So even if I write flash and eeprom from old eis to new there still will be modell specific values left in the new eis from donor car? Any way to fix this without Star diagnostic?

[schouten1977]

did you do flash to? not only eprom

[mjoesen]

did you do flash to? not only eprom

I have not tried yet, but both flash and eeprom was my plan.

[dialamoby]

so by writing both the flash and eprom will that solve the abs issue on some w906 models ?

[schouten1977]

write eprom and flash in eprom are key information stored and keypass ssid etc in flash coding from car

[fred77]

take a chance like many of us has.

Sprinter sould be ok around same year