Writing Ecu Denso BW3-8591A-00

[pierus1970]

Hello

Today I am going to program my Ecu BW3-8591A-00 with a clone Ktag (fw version 7.20) .
These are the steps I have done.
Protocol -> I have selected -> Jtag renesas and then -> family protocol 646 (being it SH7058)
Then I have clicked Write and selected the stock bin file and appears this :

ecu_1.jpg


I reselected the same bin file and then it appears this:


ecu_2.jpg


How can I solve it ?

[t7sebaa]

Why You open new account and write new posts?

Not SPAM ON forum.

There is your post with Your problem.
U Use chinese ktag clone with old version not know your bin so thats not working.
You need buy good tool or program to flash this ecu. Dimsport transdata work on this ecu with no problem
You not have tool for flash that ecu so how to help You.

[pierus1970]

I was confident because many say it should work
Is there anything I can do to try?

Does it work with Piasini 4.3 ?

[t7sebaa]

With correct pinout should work. But pinout is not like in Ktag. Because piassini take FWE from ECU not from flasher.
I dont know is piassini fix checksum but it should.