AK 90+

[TheDevil667]

hi DK´s
i have a problem with the AK90+ software!
I can read EWS but when i go to analyze do the programm nothing !!
i nedd to write a new key transponder !!

pls any help !
Thanks

[IMM0killer]

what mask are you reading?

[credoline]

There is free to download software BMW EWS Editor v3.13 or v3.20, install and use software TNT enforcer to activate not activated buttons on EWS Editor software and you can load file from EWS and do it whatever you want (manipulate) with file. But china copy of ZedBull make transponder from file of EWS with EFFi software. Also XprogM read write EWS without problem. But you must be carefull what exactly maskset you read from EWS, otherwise you can erase chip HC11EA9.

hi DK´s
i have a problem with the AK90+ software!
I can read EWS but when i go to analyze do the programm nothing !!
i nedd to write a new key transponder !!

pls any help !
Thanks

[TheDevil667]

what mask are you reading?

I have read 0D46J Chip EWS 3 / E46

I have Read and save the bin file
but when i push the button EWS ANALYZ from the AK90+ Software dosent popup a window !!
do Nothing when i push the buttton EWS ANALYZ

Key1 can i read and i see what key this is !! (1,2,3)

without analyze i can´t writing key transponder

Or my .Bin file is corrupt ???

PC = Win 7 Pro / 16Gb Ram / Intel Core i5
AK90+ is from China (Wish)
Software is from Internet, CD was Broken on delivery !!

[credoline]

And where is yours file?

[IMM0killer]

ak90 does 0d46j without any issues

try cleaning the mcu and re read again

or upload file.

[fuzz1]

Hello credoline

Just a question what happens if the chip is erased hc11ea9? What would be the way out?

Thanks

[credoline]

Load good file from another immo EWS3, make a key for it and make synhro between immo and engine ecu

[TheDevil667]

ak90 does 0d46j without any issues

try cleaning the mcu and re read again

or upload file.

Hi this is my file was i read from MCU serval times !!!

and i can only read ews MCU when i cut pin 20 !!

Greets Peter

[TheDevil667]

Hi this is my file was i read from MCU serval times !!!

and i can only read ews MCU when i cut pin 20 !!

Greets Peter

I have new read MCU wit Software v3.06

and i can write Key !!!