Should be fine.
Pass on pm.
Hello,
I'm looking to have the binary file from my airbag module reset to clear the crash data.
The car is a 2012 Acura TSX
SRS Module Part # 77960-TL2-A011-M1
The chip is a 95320
I have included the .bin file and photos of the module.
Any help would be appreciated,
Thank you,
Dennis
Should be fine.
Pass on pm.
Dennis100 (25th January, 2022)
Thank you Credoline.
The clear appears to have partially worked. When I read the codes using OBD2 scanner, the codes are gone but the dash light and dash warning message remains and another code has appeared; "U0151 Lost communication with SRS ECU (SRS Frame)".
I feel that I may have done something wrong on my part, while soldering or programming. I will try to resolder the chip, maybe it's not getting a good connection.
Sorry, i am erase one line wrong
Dennis100 (1st February, 2022)
Thanks again for your help Credoline.
This time it worked, the codes and lights are gone.
I appreciate all the help.
Thank you.
2012 Acura TXS 77960-TL2-A020-M1 Crash Clear
Hello,
I'm looking to have the binary file from my airbag module reset to clear the crash data.
The car is a 2012 Acura TSX
SRS Module Part # 77960-TL2-A020-M1
The chip is a 532wq 95320
TX_2012 77960-TL2-A020-M1 - 95320.zip
Any help would be appreciated,
Thank you,
Last edited by enriqxxx; 12th March, 2023 at 02:05 AM.
what program do you use? carprog?
Last edited by enriqxxx; 12th March, 2023 at 05:50 PM.
Here is it.
Bookmarks