Upload photo socket srs unit. I think you can clear crash with autocom via obd or on bench ...
Hello.
Need tested 100% working crash clear for my own focus.
Please.... only tested working.
And one other thing... if i wanted to fake the pretensioners with a resistance how many ohms are the right one?
Thanks
Last edited by morgano; 21st January, 2022 at 10:26 PM.
Upload photo socket srs unit. I think you can clear crash with autocom via obd or on bench ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
morgano (30th January, 2022)
This should work.
Try and report the result
Pass PM
morgano (30th January, 2022)
Hi, thanks for the effort, that solution i already had tried, keeps giving problem with pretensioners, both on driver and passenger sides, no matter which resistor i attach to the connector, tried 2.2ohm, 2.7ohm, and 3.3ohm always problem with pretensioner circuit.
Need to test with real unexploded pretensioners to see if they working. But i am having a hard time find correct ones on scrapyard. I wanted to put resistor so airbags work in the meanwhile i find the pretensioners.
Regards,
VVlad (30th January, 2022)
Bookmarks