Clio 4 Dash configuration change.

[honingkoning]

What tool can change options in Dash Clio 4.
A Friend of mine changed a Dash in a Clio 4 now PDC error and some other config issues.
Swapping eeprom caused a non working Dash, and flash swapping also no good result (did this direct by yes points on PCB).

I Tried with autel 908 pro and launch pro3S.
Can it be done by eep or by some other diag tool?

Wbr Adam.

[dusichek2012]

What tool can change options in Dash Clio 4.
A Friend of mine changed a Dash in a Clio 4 now PDC error and some other config issues.
Swapping eeprom caused a non working Dash, and flash swapping also no good result (did this direct by yes points on PCB).

I Tried with autel 908 pro and launch pro3S.
Can it be done by eep or by some other diag tool?

Wbr Adam.

Can try Renault can kline ecu tool. Or try ddtfrree4all and forscan adapter or j2534

Отправлено с моего Mi 9T через Tapatalk

[honingkoning]

I have Renault tool from immo tool,there is no Clio 4 Dash option.

I cant any info about the mentioned!!!!!

[honingkoning]

would renolink help me on this one?????

[Mmotul]

Renolink is OK for tacho configuration in Clio IV. If you yust try to enble-disable PDC, search for UPA present - not present. Tacho in Renolink is TDB table de board.

[honingkoning]

Renolink is OK for tacho configuration in Clio IV. If you yust try to enble-disable PDC, search for UPA present - not present. Tacho in Renolink is TDB table de board.

Where to buy this renolink or should i use some cracked version.

Wbr

[Mmotul]

I purchase Red Cable - OBD Link SX from Aliexpress, cca 45eur and software Renolink 1.87 from ebay some French, installed via TeamWiever, cca 50eur.
if you have CanClip and reprog you can try configuration by VIN