HOW HP CAN GET?¿ 1.9 TDI PD 115HP WHIT ARL INYECTORS AND 2052V TURBO?¡

[davidelbosque]

Hello im install ARL inyector on my AJM 1.9 115hp pd , and adapt turbo 2052v from audi ake 2.5tdi 180hp, intake from arl, im not put intercooler or change map sensor, how can get now? to used daily... tranks so much

[alonedark]

I think are you silly

[davidelbosque]

Because? tell me the problem or your opinion?

[chrissysnaith]

this setup will need logging and tuning accordingly ,that turbo is only good for about 1.8bar boost or 210-215hp on a good day upload youre file i may be able to help get it to run nicer on the arl injectors but it will need a full custom map

[chrissysnaith]

try this and report

[davidelbosque]

Thanks so much chrissysnait for the information the Next week im finish the turbo installation, and in this moment i need help from profesional to do me a good tune file, you have my thanks bro!

[alonedark]

Yes sure you can use 1.8 with 2.5 sensor

[davidelbosque]

Dont worry im get a map sensor 3bar from Arl

[alonedark]

and

chrissysnaithy change map sensor linearion in her mod files or only use 1.4bar in her mod?????? you can get in low a good pressure no????

3bar sensor without best refrigeration and 2052 good performance

[alonedark]

​1.8+1 atm pressure you get 3.1,3,2 peaks like they did the mod I still don't understand

[kamil1234]

required 3.bar sensor. and intercooler. the little one can't handle the pressure and the loose on the joints is useless. need femic or similar

[davidelbosque]

you're right I'm going to need a bigger front intercooler, tomorrow I'm going to look for a second hand one and buy the 3 bar map sensor, thanks guys the Next week im im upload my stock original file yo dow me a perfect stage , thanks so much