tm 6000 series channel list 21/2/2010

[benny/9]

this is a tm 6900 series channel list.
that has all the channels on all the satellites
sorted in a good viewing order and will
save you hours of channel moving and sorting.
this list has tv channels only [no radio channels] scanned
and covers the following satellites:--------
30w-24.5w-15w-12.5w-8w-4w-1w-4.8e-7e-9e-10e-
13e-16e-19e-23.5e-26e-28e-33e-36e-39e-40e-42e
depending on your dish size you might not receive
all the satellites, set your sat list for the sats your dish size can
get good strong signals from. i use a 36v motor and a v-box with my
dish, if you follow the following instructions you can use
this list on your receiver without losing your dish settings
****************************************
how to change chn lists [this does'nt factory reset your box]
leave your dish on any sat your settings will not change
menu>pin 0000>system settings>ok factory reset>ok
enter pin 0000 and go to line [3] deleate all channels
press>ok and yes and save the change
take the chn file out of the folder ready to transfer to your memory stick.
then put the memory stick in the usb port on the receiver and download
the new channel list to the sat box.also check and re-set your satellite list
***************************************
i have also loaded this list on the clarke-tech 5000HD cplus combo
this is the same spec as the tm 6900 super. i have also tested
this list on the tm 6900_super model and the tm 6900 original model
i have not tested it on any of the tm 6800 models