307 EDC16C34 Im*o off

[alexs307]

Hello. Can someone help me making immo off on my 307? I have put a new ECU in, from another car.

The engine is 307 1.6HDI, 9HY, no FAP.

This is the EPROM file, if anyone is so kind to make immo off.

Thanks in advance.

[bouslama]

it doesn't work with flash you can buy a virgin ecu

[tachonow]

Try this and post result.

[benci1982]

send me the login (pin code) of the car

[Kanaan]

you can not make im*o off in this car .
you will need to rest the ecu then program it to the car again .

[sl4ck]

you can not make im*o off in this car .
you will need to rest the ecu then program it to the car again .

Can you please explain it better?

Is it virgin possible?

Thanks

[benci1982]

you can not make im*o off in this car .
you will need to rest the ecu then program it to the car again .

you're wrong, may be switched off the immo. I also have a ecu without immo

[benci1982]

Hello. Can someone help me making im*o off on my 307? I have put a new ECU in, from another car.

The engine is 307 1.6HDI, 9HY, no FAP.

This is the EPROM file, if anyone is so kind to make im*o off.

Thanks in advance.

send the original pin of the car. !!ECU should not be made to virgin mode!!

[sl4ck]

@ alexs307
could you please provide ECU Bosch part number or even PSA part number?


@ benci1982
So, is it possible im*o off or virgin also?

[benci1982]

yes, it possible im*o off or virgin

[Kanaan]

Can you please explain it better?

Is it virgin possible?

Thanks

Hi

yes , you can not disable the im*o but you can reset the ecu so the ecu can except the new car code first time the ecu will run on the car .

if you have the original ecu and its dump is still ok then you just need to copy the dump from the old one to new one and you are done .

in case the old ecu has a corrupted dump so we will need to make a new dump that contain the original pin code for the car .

Good luck
Kanaan

[alexs307]

Sorry for the lack of news. I have managed to make immo off with immocleaner2. But the engine didn't start. So I asked a very nice girl to borrow her 307 for 2 hours, and I cloned the BSI, ECU, teached a new key ( ID46 ) and vrooom.

Thank you all for your help.