1570 menu not working?

[frankgallagher]

Hi folks, bit of a newbie at this so please bear with me.

Been running a "The Box Super" for abouta year or so with few problems.

Like a lot of folks, I lost all my $ channels recently.
Followed the forum advice

Menu - factory settings (iput 0000) - automatic scan (picks up about 400 channels)

Exit, exit

I then press menu and try to enter 1570 to turn the emu thingy on, nothing happening. Used to get into this page no problem

Info on the firmware screen thingy is

THE BOX Super
API ver : 8.02e_E
Boot ver : 8.0
30. Nov. 2008


Any tips or info very much appreciated.
One thing that i do know, is my remote is past it's best. Left to it's own devices it inputs constant 4's, so I first thought maybe 1570 was being broken up by random 4's. Tried several times, covreing the remote front etc.

Toying with buying a new remote, but in two minds in case it's not a remote issue, plus the imminent N3.

I'm in Fife, Scotland if that helps


Much appreciated Guys


Frank

[chucklor]

Try deleting all tv and radio channels when you do a factory re set, rescan then go into the menu,1570 swithon emu and click load defaults....chuck

[Tezza]

whilst in menu scroll down to channel edit then try 1570

[smoggy]

with all the changes lately although 8.02e_E previously worked you probably now need to flash with firmware 8.04e

[phelo]

select parental control then press info 2004 an your in, but you have to select parental control not just highlite it, then press info 2004

[frankgallagher]

Hi guys, tried in vain with this... eventually got a new remote and got into 1570 no problem