AKL psa delphi bsi 2017+ key programming issues.

[rob h]

AKL psa delphi bsi 2017+ programming issues.


Pin from dealer.


Pin ok
Ammount 1
turn ign off
turn ign on


Then connection is lost, and blinkers acitvate.
Keyless and with regular ignition lock.

A colleague had similar experiences.
Some just where normal. Only a few not.


Tried with Avdi Uco and launch, same result.

Perhaps something to do with the flash versions.
Not the eco mode.

Door needs to be open?


Anyway, someting is not going well here, with some.

Someone knows, what this might be?

Greetings Rob

[olegario]

If you use Diagbox , you can see, that on modern cars it is normal, diagnostic tool warns you that it can happened. Especially when you lost all keys. Car start blinking 30 minutes security wait time, you need connect charger if battery not good. After 30 minutes you can continue.

[rob h]

Allright,,

Not all, so this depents on config, of sw version.

After a pin reading from bsi, IT never Lets me wait.
I Will try IT with diagbox next time.

Thank you

[Manta1600]

No need diagbox just wait 30min with ign ON

[rapidlocksmiths]

ditto just wait 30 mins with ignition on , sometimes is quicker but wait 30 mins anyway

procedure

read pin then wait 30 mins with ign on waiting for hazzards to stop then program key

if as you have you didnt do this and read pin then went straight to programming key , leave ignition on for 30 mins and hazzards will stop and car should then start fine