Maxidot fabia malfunction

[javiermdlt]

Hi everyone, I am trying to put a maxidot from a fabia mk2 into a fabia mk1

The "new" maxidot is the 5j0920840c and I have been following this steps:

1) Refreshed coding in 19-Can Gateway


2) Logged in 25-Immobilizer with PIN from new dump.


3) In adaption channel 00 resetted to factory default.


4)The instrument cluster now shows Immobilizer Adaptation active, wait until it changes to Immobilizer active - this may take up to 2 Minutes.


5 )Entered original PIN in channel 50 to do a vehicle authorization.


6) Logged in 25-immobilizer with original PIN and adapted my old keys.

But when I go to channel 50 and put the PIN from the old cluster then when I press "Test" I see "malfunction" and the pin do not change despite the fact that I give it to save


photo_2022-06-24_17-25-28.jpg


I do not know what to do next, can anyone help me? I also upload the original .bin from both cluster in case it helps.