Carprog 8.1 online flash problem...

[audio]

Hello!
I need a little help.
Clone 8.15 online Carprog token has expired. I tried flashing again, but there is a problem, because after flashing, the device "says" that "the device cannot be recognized as a USB drive".
I've done it three times now, but the problem is always the same.
The environment: IBM T30 notebook, Win XP prof, J-Link V8 clone, J-flash 4.80.
AT88SC removed (not damaged, because transferred to an old Carprog is perfectly fine). AT92SAM7S256 deleted (55 pin...), AT92SAM7S256 project selected, J-flash boot: recognizes as 'ARM7TDMI Core 0x3F0F0F0F'
The *.bin file is "CP ONLINE 150428CAR00491KW.bin". I open it and program it, and check. Everything seems good, but the machine still does not recognize Carprog.
What am I messing up?
Thank you very much for your time!
wbr. audio

[sebage]

Two possible options come to mind:
- try another firmware, maybe that "CP ONLINE 150428CAR00491KW.bin" is corrupt;
- make sure that after rewriting, you definitely put pin 55 at GND.

[audio]

Two possible options come to mind:
- try another firmware, maybe that "CP ONLINE 150428CAR00491KW.bin" is corrupt;
- make sure that after rewriting, you definitely put pin 55 at GND.

--------------------------------------------------------------

Hi!
Thank you for your answer!
Of course, after programming pin 55, I connected it to GND. Unfortunately, I don't have another "CP.... .bin".
If someone could help me with another content, I would really appreciate it!
Thanks!

[sebage]

Now, in such a hurry, I found this.
I see that there are colleagues who used the material and it worked.
It is worth trying to see if it revives, even after that you will be able to choose another library and another version.

Post Nr. 3 ...
https://www.digital-kaos.co.uk/forum...ything-Carprog

[audio]

Thanks for the link!
I programmed this *.bin, but the machine does not detect anything!
If I write back the previous one, "the USB device cannot be recognized" as before.
I checked everything, compared it with the old Carprog, I can't find any hardware errors.
While the online feature was working, without further ado...
wbr.