AUDI A5 2010r bcm2 copy problem

[PABLOPOLAND]

Hello audi A5 2010 year 2.0tfsi coupe USA damaged BCM2 8K0 907 064DG (water). no ignition and a message on the MMI component protection. I bought a second BCM2 with the same numbers, after installing it without programming, I got the ignition and the functions of windows and handbrake. I made copies of mcu70f3381 and eeprom 95320 for the new module. now no ignition, the remote control works, closes, opens
Thank you for the hints

[Ecuprog31]

You need to change immo data in new used bcm dump from original

[PABLOPOLAND]

if I send files from the original bcm, are you able to transfer the immo data to the new used bcm?

[Ecuprog31]

I’ll try Send it

[Ecuprog31]

I’ll try Send it

[PABLOPOLAND]

Eeprom or flash

[red69]

Hello try this

[wuza]

Try and report. Attachment without password.
Maybe it is same file as from red69...
Couldn't proof it, because the file from red69 is protected with password...
BR

[PABLOPOLAND]

hello files uploaded ignition missing on both solutions, how can this problem be solved? because it seems to me that the eeprom content from the original is damaged

[Antonio266]

hello files uploaded ignition missing on both solutions, how can this problem be solved? because it seems to me that the eeprom content from the original is damaged

Write this New Eeprom and this Flash to your Donor BCM2 and report results, pass in PM.

[PABLOPOLAND]

hello I uploaded your eeprom and flash files the car does not burn no ignition after inserting the key the steering lock is released. autel im508 cannot read immo data reports an error on the original files, it reads and encodes the key. maybe you can repair the original file?

[immoneard]

Your Original BCM2 has Error , that needs to be repair first .
Now Looks like Replacement BCM2 is NEW , not used .
#1 option repair original files and after that write flash and eeprom to new BCM2 and you should be all set.
You can do this at info autokey by, of course not for free.
Or If you have PolDiag tool you can do it for free OBD.

#2 option, Write in NEW Bcm2 original files back , and program it with ODIS Online.