have you disconnected antenna coil near ignition barrel?
why double thread?
https://www.digital-kaos.co.uk/forum...01-32-immo-off
hello
i have a problem with this car,i make immo off,disconnect immo,after erase trouble code car start normal
rexton 2,7 diesel,automatic transmision,ecu delphi a665 540 05 32,eprom 95320
The problem is that after a few starts, the accelerator pedal no longer works and the error codes return
I delete the error codes, the car works perfectly, I drive 50km
after I stop the car, the error codes return
where would be the mistake, I manually processed the immo area based on the information here
I have no problems with immo, just with the accelerator pedal
I write the eprom with upa, blocked with 8C
after deleting the errors all disappear
can anyone give me an idea how i solve the problem?I'll try tomorrow to change the eprom and post the results
Last edited by rdu04; 7th January, 2020 at 06:41 PM.
have you disconnected antenna coil near ignition barrel?
why double thread?
https://www.digital-kaos.co.uk/forum...01-32-immo-off
Last edited by rafal; 7th January, 2020 at 07:05 PM.
need help
now my goal is to buy xp-005
who will help?
because no one answered and another problem appear
I'll change the title
sorry
I did not disconnect the coil, I disconnected the immobilizer, the 5-wire socket leading to the coil
the key light does not light, the car starts
my question was did i correctly modify the eprom? should it be written in 8C or 80?
Last edited by rdu04; 7th January, 2020 at 07:21 PM.
Rafal,you can check or process my original eeprom?
thanks all,problem solved i change eprom
Last edited by rdu04; 8th January, 2020 at 01:35 PM.
I tried turning off immo but the car doesn't have acceleration after. This is the original reading:
rexton 2,7 number ecu a665 540 06 32 sang ypng 2009.rar95320
Can you help me with this operation? Thank you in advance.
Last edited by natkahello; 8th August, 2022 at 12:50 AM.
Bookmarks