Bmw bike bw9

[rokibar]

Today open and remove cilindar lock from bmw bike bagage box with bw9 key. I have wafers number but condor xc mini want cut this key. Are there some trick or this machine cant do it?
Machine version 6.5.8

[hollanda]

This cilinderlock isn’t full wafers.

you need to decode the fuel lock or ignition switch for full code

[rokibar]

This cilinderlock isn’t full wafers.

you need to decode the fuel lock or ignition switch for full code

I know that. I put numbers at missed wafers. Simply machine want start cut. Some probe at key and stop.

[P&D]

Today open and remove cilindar lock from bmw bike bagage box with bw9 key. I have wafers number but condor xc mini want cut this key. Are there some trick or this machine cant do it?
Machine version 6.5.8

Sorry I don't understand what are you trying to do ?

the BW9TE keys are 4 cuts each side and 3 depths
if you know some of the cuts enter them in IC and get the cutting tree for the missing cuts

[rokibar]

Sorry I don't understand what are you trying to do ?

the BW9TE keys are 4 cuts each side and 3 depths
if you know some of the cuts enter them in IC and get the cutting tree for the missing cuts

I did it. Machine want cut any dephts.
Now understend my problem?
Looking its question for xhorse enginiers.

[P&D]

I cut them all the time on the Xhorse Dolphin without any probs

[rokibar]

Here nothing. Simpply machine want start cut.
Waiting hxorse enginer.

[hollanda]

Have you update the machine?
Whats the code that you have try?
i want to check it on my machine
dolphin

[rokibar]

Have you update the machine?
Whats the code that you have try?
i want to check it on my machine
dolphin

This is
20220908_082504.jpg

[P&D]

Everything looks good on the screen
the only thing different to mine is the cutter I use a 1.5 mm & your using a 2.5mm

change it to a 1.5mm see if the machine allows you to start to cut

on the Dolphin it tells you to change the cutter with certain key profiles

worth a try Thx

[rokibar]

Fail is put key. For me looking problem is in high key position. Tried put plastick part under key which i do when cut keys foe renault cards but same. Xhorse enginer still no answering at my request.

[rokibar]

Strange but this morning working with plastic part under blade. Tried this way wasn't cut. Haven't coment. Some magic.

[p1et]

Hi.

Today I needed to cut this BW9 BMW motorcycle key on Xhorse Dolphin. Machine was calibrated fine but for some reason, it barely cut this blade type, I mean I needed to set +0.3mm depth to cut it like it should. Is this some bug or what?

[P&D]

Is it just this key or are you having problems with BW9TE or other keys

error 35 is a calibration issue the probe it to low
below the cutter height

http://blog.xhorsevvdi.com/how-to-so...code-35-and-6/

[p1et]

Other keys its cutting fine so far, only this was problematyczne. There was bo any error sign