NEW EX5100 "code being updated" problem

[funky_banana]

can anybody please help me out.

Ive just bought a EX5100 PVR of ebay.

Updated firmware successfully,
System information shows SW VER: 1.0 ST4 Jan 16 2009
H/W Ver: 2.0t k5 +D
Bootstrap v001
SW Build: Kuro

Done Scan, found hundreds of channels, freeview channels work fine.

Problem:: When I select a pay channel ie Disney Channel it says "Please wait, code being updated..." but is sits there for hours doing nothing.

Ive re-downloaded the firmware and update box, done resets and restores and re-scans. scan using 6.887..

Can anybody help, cant find any info anywhere for this problem..

Also, i have a MAX-V box, if i connect that in place of this do a scan using 6.887 it finds all channels and they are all fine and all viewable so i know its not code problem in my area (Hertfordshire).

Thanks guys if you can help

[chic.]

make suru the emm is enabled

[funky_banana]

what is emm? where do i find that?

[chic.]

what is emm? where do i find that?

press menu and on lanuguage settings press ok then type 1968 and enable the emulation ps it unlocks the channels

[mark8393]

south Hertfordshire is now nagra 3, new encryption, hope your not there as it will not work whatever you do.

[funky_banana]

ok im trying that now, when i click ok on language settings it brings language screen up:
Menu Language - ENGLISH
1st audio lang - ENGLISH
and so on

At this stage i type 1968 and the screen briefly flickers, then ive pressed red button to save.. is this correct?

i typed 1968 again and another screen come up:

Irdeto/Betacrypt

Table with no entries in it. at top of table says Name, provider, key, key data


any ideas??

[funky_banana]

my MAX V box is workin fine, so cannot be Nagra 3 can it??

Ive just re-installed firmware onto eurovox, just before it says Downloading is successful it says "downloading is failed", it shows failed for about 1 second and then changes to successfull???

anyone had this problem?

[chic.]

ok im trying that now, when i click ok on language settings it brings language screen up:
Menu Language - ENGLISH
1st audio lang - ENGLISH
and so on

At this stage i type 1968 and the screen briefly flickers, then ive pressed red button to save.. is this correct?

i typed 1968 again and another screen come up:

Irdeto/Betacrypt

Table with no entries in it. at top of table says Name, provider, key, key data


any ideas??

what do you mean by and so on there should be 4 english when you type 1968 it brings up the emm if this is non working then reflash the box

[chic.]

you type 1968 once if its not bringing up the emm flash again b4 you do that try and put the keys in manually and see if that works

[funky_banana]

you type 1968 once if its not bringing up the emm flash again b4 you do that try and put the keys in manually and see if that works

when you say 'if its not bringing up the emm'? what should i be looking for? what does emm look like?

if i type 1968 once it just flickers, just flashed box again and exactly the same ...

What does emm look like, never done this before so not sure what im looking for??

[chic.]

there will be 5 options instead of 4 english>english>english>english>the last one should say enabled ,put the keys in manually chances are thay wont change b4 n3 hits your area

[funky_banana]

there will be 5 options instead of 4 english>english>english>english>the last one should say enabled ,put the keys in manually chances are thay wont change b4 n3 hits your area

chic thanx for your help man... appreciated... BUT:

still not working, its going in the bin in a moment ..

Ok ive just downloaded firmware again from 4shared.com and flashed it with that incase problem with firmware on this site(which i doubt), this time when i type 1968 it does come up with EMM and its enabled.

Now when i type 1968 again it gives me these key tables.. as i press to the right or the left it changed the CAS type, There are only key entries in Nagravision, there are NO entries in Irdeto/Betacrypt, Seca and ViAcess.. Should there be entries in here? if so where do i get the codes from, any one got a link to page? im in hertfordshire area on virgin..

thanks for help so far

[chic.]

chic thanx for your help man... appreciated... BUT:

still not working, its going in the bin in a moment ..

Ok ive just downloaded firmware again from 4shared.com and flashed it with that incase problem with firmware on this site(which i doubt), this time when i type 1968 it does come up with EMM and its enabled.

Now when i type 1968 again it gives me these key tables.. as i press to the right or the left it changed the CAS type, There are only key entries in Nagravision, there are NO entries in Irdeto/Betacrypt, Seca and ViAcess.. Should there be entries in here? if so where do i get the codes from, any one got a link to page? im in hertfordshire area on virgin..

thanks for help so far

you should have told us where you lived south hertfordshire is now n3

[funky_banana]

you should have told us where you lived south hertfordshire is now n3

I did say in my post where I was.. But im not south hertfordshire.. And my MAX V box sitting here is working just fine and de-scrambling all channels..

so it cant be n3 yet!!! is there a link to get key codes, ive searched and seem to finds so many different ones??

what would you try next to get this EX5100 running, its just cost me 90 bills off ebay.. My max V box is working here nicely but want kids channels for my little girl in her room with the new box

thanx guys for help

[mark8393]

you should have told us where you lived south hertfordshire is now n3

thats what i said earlier, but they say they have a box that worked.

try that box again and see if it still works.