1. Remove dash from car.
2.Open dash and remove all internal connectors and pcb from dash.
3.You will see one BIG eeprom 28C16 i think it was NEC or something like that.
4.Desolder eeprom and solder eeprom socket on it's place.
5.Read eeprom and you will see that milleage is verry simple to change. It is not coded or secured.
6.After changing eeprom information DO NOT PUT back in dash.
7.Assemble dash and put in car.
8.Give car in ignition and wait about 20 seconds then swich ignition OFF.
9.Remove dash from car and then put chip inside.
10.Put dash in car and then give ignition ON and new milleage must be on display.
Regards.
Bookmarks