SIMTEC 71 Virgin

**MrQvik** · 7th October, 2022, 08:23 AM

Car OPEL Zafira A 1.8 16v 92kw (2004)
Hi, when i do RESET ECU via IOTerminal must have to do some learn procedure or just swap ecu and turn ignition on?

Thanks

**kiszka** · 7th October, 2022, 09:45 AM

Originally Posted by MrQvik

Car OPEL Zafira A 1.8 16v 92kw (2004)
Hi, when i do RESET ECU via IOTerminal must have to do some learn procedure or just swap ecu and turn ignition on?

Thanks

Look for, such situations at Opel have been described many times here
In google you can find it in 30 minutes and maybe even faster so many times it was written about it

**MrQvik** · 7th October, 2022, 11:17 AM

Thanks for you reply, but still nothing resolved. Maybe if you knew that it would be better to post a link than write this comment.

The world would be a better place, peace

**rafal** · 7th October, 2022, 01:30 PM

Originally Posted by MrQvik

Thanks for you reply, but still nothing resolved. Maybe if you knew that it would be better to post a link than write this comment.

The world would be a better place, peace

don't be lazy.....................
https://www.youtube.com/watch?v=TURWdqk-0gc

**MrQvik** · 7th October, 2022, 02:04 PM

Thats fine but for CarProg and security pin solution -old ecu is burned (with eeprom). I made reset ecu to virgin via IOTerminal.

**MrQvik** · 7th October, 2022, 02:49 PM

Yes, I understand. I have carprog, opcom, and other. This is not a problem. The solution you give me is functional and verified. I know. But out of curiosity, I'm asking how it works in the case of resetting the ecu using the IOTerminal. I have no problem with not being able to get it working. But I'm interested in how it behaves in the second solution and since I don't have the car in garage, I want to prevent problems. that's why I'm just asking.

Thanks for you

**rafal** · 7th October, 2022, 02:27 PM

read pin from other unit ( immobox ) , adapt ecu to car by opcom - job done

**brobble** · 7th October, 2022, 05:34 PM

I think IO Terminal just reset the ecu, so that it is learnable. You can reset the ecu by yourself with pin of ecu with opcom. Only if ecu is reset you can adapt it again to another car. That´s it.

Greets MR...

**MrQvik** · 10th October, 2022, 07:30 AM

Originally Posted by brobble

I think IO Terminal just reset the ecu, so that it is learnable. You can reset the ecu by yourself with pin of ecu with opcom. Only if ecu is reset you can adapt it again to another car. That´s it.

Greets MR...

Thank you for your reply brobble