2007 Volkswagen Passat immo pin
Register
Page 1 of 3 123 LastLast
Results 1 to 15 of 32
  1. #1
    DK Veteran
    BestElectrical's Avatar
    Join Date
    Feb 2010
    Location
    San Diego, CA, USA
    Posts
    535
    Thanks
    193
    Thanked 127 Times in 69 Posts
    Downloads
    2
    Uploads
    0

    Default 2007 Volkswagen Passat immo pin

    Hello guys I am working on a 2007 VW passat 2.0t and i need to program a key for it. I am looking for a security access key code. where can i get that pin.? I called VW and they refused to give that information. Anybody knows where i can get it?

  2. #2
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    PIN is in ECU and in comfort module (behind glove box) which comprise immobilizer.
    Read out dump of eeprom and post here.
    To adapt key you need also security bytes, so better read dump of comfort module, because it contain all 7 bytes.
    Which tool will you use to learn key?

  3. #3
    DK Veteran
    BestElectrical's Avatar
    Join Date
    Feb 2010
    Location
    San Diego, CA, USA
    Posts
    535
    Thanks
    193
    Thanked 127 Times in 69 Posts
    Downloads
    2
    Uploads
    0

    Default

    Can I use ross-tech VCDS?
    Ross-Tech: Home
    i will read the dump from the module and post it shortly

    heres the dump:
    Attached Files Attached Files
    Last edited by BestElectrical; 3rd March, 2010 at 09:40 PM.

  4. #4
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    VCDS will not adapt key to immo4 vehicle.
    I use VAG K+CAN (AVDI) commander with function "Key learning".
    Pls read additionally eeprom of ECU.

  5. #5
    Top Poster andresfn18's Avatar
    Join Date
    Feb 2010
    Location
    Mexico D.F.
    Posts
    169
    Thanks
    36
    Thanked 10 Times in 5 Posts
    Downloads
    4
    Uploads
    0

    Default STERING LOCK

    YOU MOST READ THE MICRO IN THE STERING LOCK
    IT`A HC08

  6. #6
    DK Veteran
    BestElectrical's Avatar
    Join Date
    Feb 2010
    Location
    San Diego, CA, USA
    Posts
    535
    Thanks
    193
    Thanked 127 Times in 69 Posts
    Downloads
    2
    Uploads
    0

    Default

    here is the dump from the ecm...

    do i need to read from steering lock ecu?
    Attached Files Attached Files

  7. #7
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    Login - 31487
    Component security bytes - 69 B1 81 A2 06 8E 06

    You can adapt key with commander, but not with VCDS i think.
    Attached Files Attached Files

  8. #8
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    Just got the message from Abritus72 that CS bytes are incorrect. They suggest to read them through OBDII. So ignore them.

  9. #9
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    The same situation with PIN extracted from dump using dump tool. It's also encrypted. Real PIN 03138. Pls check if ECU accepted one.

  10. #10
    DK Veteran
    BestElectrical's Avatar
    Join Date
    Feb 2010
    Location
    San Diego, CA, USA
    Posts
    535
    Thanks
    193
    Thanked 127 Times in 69 Posts
    Downloads
    2
    Uploads
    0

    Default

    the pin 3138 was accepted but im unable to learn the key for some reason, anybody knows a cheap tool that is able to do this stuff? i have Ross-Tech: Home tool

  11. #11
    Top Poster andresfn18's Avatar
    Join Date
    Feb 2010
    Location
    Mexico D.F.
    Posts
    169
    Thanks
    36
    Thanked 10 Times in 5 Posts
    Downloads
    4
    Uploads
    0

    Default FAZIT

    YOU NEED A FAZIT TRANSPONDER KEY, BUY IT IN THE AGENCY BY VIN CAR!!!

    IT`S THE CHIPER WAY!!

  12. #12
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    To adapt key to vehicle you need to prepare dealer key. It means that you have to put 7 security bytes into Megamos 48 transponder prepared as TP23 (according JMA classification for VW). Then, knowing login, correct key learning procedure should be applied. It's impossible to make such key using VCDS. I use AVDI, Tango programmer and chips TP22-25. If you don't have such transponder, you can order key for your car according your VIN. It will be delivered with cut blade and ready to be adapted (CS inside). But correct tool for learning stage will be required. For the safety reason, it will be better if, before adaption, you save eeprom dump of comfort module, because there are Passats which die while key learning due to defective modules.

  13. #13
    DK Veteran
    BestElectrical's Avatar
    Join Date
    Feb 2010
    Location
    San Diego, CA, USA
    Posts
    535
    Thanks
    193
    Thanked 127 Times in 69 Posts
    Downloads
    2
    Uploads
    0

    Default

    Quote Originally Posted by Alex789 View Post
    To adapt key to vehicle you need to prepare dealer key. It means that you have to put 7 security bytes into Megamos 48 transponder prepared as TP23 (according JMA classification for VW). Then, knowing login, correct key learning procedure should be applied. It's impossible to make such key using VCDS. I use AVDI, Tango programmer and chips TP22-25. If you don't have such transponder, you can order key for your car according your VIN. It will be delivered with cut blade and ready to be adapted (CS inside). But correct tool for learning stage will be required. For the safety reason, it will be better if, before adaption, you save eeprom dump of comfort module, because there are Passats which die while key learning due to defective modules.
    Do you have the links where i can get all this right tools? thank you very much for helping

  14. #14
    DK Veteran
    Join Date
    Sep 2009
    Posts
    408
    Thanks
    8
    Thanked 34 Times in 24 Posts
    Downloads
    22
    Uploads
    0

    Default

    www.Abritus72.com
    You need AVDI with VAG key learning function and order officially key by VIN. If you make business with VAG vehicles you'll get all your money back.

  15. #15
    Senior Member
    Join Date
    Sep 2009
    Posts
    255
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Downloads
    20
    Uploads
    0

    Default

    ALEX789 PLZ I WANT TO ASK YOU ABOUT AVDI FOR ABRITUS 72 DO YOU HAVE THIS IS GOOD FOR PROGRAMATION THE KEY VAG FOR THE NEWS CAR A6 AND Q7

 

 
Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •