DELPHI VCI DS150 CRACKED

**mick711** · 8th March, 2010, 10:29 PM

Just :

Autocom CDP , Opus CMT , Delphi DS100e DS150e , Wurth Snooper is exactly same hardware look the bin files with hexedit you can see CDP because the hardware is make by Autocom

**wizz2c** · 8th March, 2010, 10:39 PM

Originally Posted by mick711

Just :

Autocom CDP , Opus CMT , Delphi DS100e DS150e , Wurth Snooper is exactly same hardware look the bin files with hexedit you can see CDP because the hardware is make by Autocom

Opus Autocom and Delphi have the same software or it's possible just delphi have flyrecorder but i don't know if it can be used with ds100 or 150 , i just see the old software of Wurth on 2007 and it's java software .

I think you can flash CMT CDP DS150/100 Snooper with this bin files and use Delphi software, i can see the key with hexedit but i don't know if it's possible to change because there have a seconde "key"

i also think that cmt and others will run with ds800 software but have not tested this yet so i cant say for sure. you mention hexedit, hex of the atmel is that? and what is this second key? got me interested

**ando026** · 11th March, 2010, 11:59 AM

thank you works

**mick711** · 15th March, 2010, 12:50 PM

No good for

**mechanior** · 15th March, 2010, 07:43 PM

bluetooth passkey 0

**bossixbv** · 23rd March, 2010, 12:51 PM

Hi everybody. Just tried to read the Atmel today but without any result. You said it should be at90ls2343. I don't know if there are differencesbetween the different products. I have a Opus CMT and at the location indicated in the picture i have the following: ATMEL 0169/ TINY V45/ 1OSU. What am I doing wrong?
I appreciate any help that could get me further with this one.

**liketoseeu** · 23rd March, 2010, 05:28 PM

hi I have a delphi ds150 seen as unknown device on pc with USB do you know how to repair thanks.....

**bani** · 28th March, 2010, 10:07 PM

to "liketoseeu" => I can help you...

I have full dump of ATtiny45V, and eeprom 93C46.
Just need some info about serial number and entering activation key. Can anybody help me?

**szym31** · 1st April, 2010, 07:52 PM

Hi everybody, that my first post that i sey too ALL HIIIIIIIIII.
I by few days ago CDP Scan an now I want upgrade the soft to CDP Pro. Can I use software from delphi ? sombady testet it? or Pls give me some info.
PS. What is in this file from wizz2c on first post on 1 page, I can not download.

**ss110** · 9th April, 2010, 04:08 PM

Hi, I have the same problem, so please help.

**mick711** · 9th April, 2010, 11:13 PM

one post

It's dump with serial of the DS150 hardware and info for full install software .

**szym31** · 11th April, 2010, 08:41 AM

please pasword to bin file. I try save nad run soft from delphi on autocom

**asid12** · 13th April, 2010, 10:02 PM

Hello all!

I would like to know password for binary file in archive.

BTW I try'd to do upgrade for Autocom software. I just copy from working PC software and replace one file from my old installation. Everything woks fine.

**mick711** · 15th April, 2010, 12:20 PM

Originally Posted by asid12

Hello all!

I would like to know password for binary file in archive.

BTW I try'd to do upgrade for Autocom software. I just copy from working PC software and replace one file from my old installation. Everything woks fine.

For password send MP and thanks button to Wizz2c .

Just what files you replace ?

Thanks