Godiag GD101, VNCI J2534 Nano

**VNCI Wu** · 17th May, 2023, 08:24 AM

[QUOTE=ProximaCentauri;4544018]有趣！该更新是否已发布？最近我尝试使用最新的GD101 2.1驱动程序+ 1.8固件，但Clip仍然无法正常工作。
如果 VNCI 驱动程序与 Clip 配合使用，我可以在哪里下载它们？当我向VNCI Nano卖家询问驱动程序时，他给我发了...改为GD101驱动程序。当我向Godiag官方卖家询问驱动程序时，他给我发了VNCI Nano驱动程序，但是一些旧版本。因此，似乎即使是（官方？）卖家也看不出区别。[/引用]

The black case uses GODIAG's driver, while the red case uses VNCI's driver

**ProximaCentauri** · 17th May, 2023, 02:43 PM

Originally Posted by VNCI Wu

The black case uses GODIAG's driver, while the red case uses VNCI's driver

Then the people selling them(including official stores) don't know that, since they're sending the wrong drivers. Anyway, I have the red VNCI J2534 Nano, are the Clip-compatible drivers released somewhere already?

**VNCI Wu** · 18th May, 2023, 01:57 AM

[QUOTE=ProximaCentauri;4547493]然后卖它们的人（包括官方商店）不知道这一点，因为他们派错了司机。无论如何，我有红色的VN CI J2534 Nano，兼容Clip的驱动程序是否已经在某个地方发布？[/引用]

驱动程序兼容，但我需要修改注册表。测试完后，我会回复你。这将需要几天时间

**VNCI Wu** · 29th May, 2023, 04:44 AM

I have tested the Renault clip and it does not work. I will continue to search for issues and will only reply to you when I am sure it can be used

**ProximaCentauri** · 29th May, 2023, 08:07 PM

Thanks for the update on the matter. Is it the same as I described - after editing the registry according to https://www.digital-kaos.co.uk/forum...p-OpenPort-2-0 , Clip detects the passthru but can't connect to any ECU or read VIN?

If you need any extra testing then feel free to message me.

**VNCI Wu** · 6th June, 2023, 09:51 AM

Hello, there are new updates to GD101 and VNCI nano. You need to update the V2.2 software and drivers in the Device Manager. After the update, you can now use Rallo's CLIP software.

**VNCI Wu** · 6th June, 2023, 09:53 AM

b57113903b4890e56159b09f9a188b0.jpgI have tested it in V2.2 and there are no issues. If you have any new issues, you can contact me at

**torzet** · 6th June, 2023, 06:49 PM

VNCI Wu
Make version 2.2 drivers available for everyone

**VNCI Wu** · 7th June, 2023, 01:54 AM

Everyone can use it, and the online update software is ready to use

**torzet** · 7th June, 2023, 01:12 PM

I am asking for a link to the new 2.2 drivers, I did not find it on the web. Online firmware update only

**ProximaCentauri** · 7th June, 2023, 06:24 PM

Thanks for the news! Indeed I have tested the new 2.2 driver with an ECU on bench and it is now working! (will try in car later too but I see no reason why it wouldn't work).

There are some issues with the driver updater though.
First I tried to update using the GD101 drivers update tool, I tried various versions but none worked. It detects version 2.2 on server but it fails to download it (it says "Completed" but the update file is not downloaded).

After that I tried the update tool in VNCI Nano 1.3 driver and it worked, it downloaded the 2.2 installer and I could successfully update. Connected to ECU on first try - good work VNCI Wu! It seems it's not true what someone else here said about bad support.

I'll send the driver installer (the update tool downloaded full installer) to torzet so he maybe adds the link to the main post.

Edit: tested in a car and it actually seems to support Clip better than OP2.0, or at least the clones of OP2.0 - more details in the Openport Clip thread.

**VNCI Wu** · 8th June, 2023, 02:24 AM

Thank you very much for your feedback. It was my oversight and I forgot to upload it online. You can now update the GODIAG software online. Of course, there are also separate meg links:
https://mega.nz/file/wac0yIyJ#hjpV3m...7mpCQ74IZcDGd0 GD101 GODIAG V2.2
My SKYPE is: not allowed ...

If you have any other questions later, you can contact me

**kostyal** · 23rd June, 2023, 10:06 PM

Hello, I am having issues connecting GD101 to Lexus RX via Techstream. I can read VIN and only a 4 of 21 ecu! Could this be fixed with a driver update or is it a GD101 hardware issue?