VAG-COM/VCDS EVERYTHING

[ahadi]

Next dump it is 11.11.0
From 11.2 to 11.11.0 no other dump
Good luck

Thank you .

if you have 11.11.0 dumps ,please upload .

[KenshinPT]

Thank you .

if you have 11.11.0 dumps ,please upload .

Too good to be true!

11.11.0 is not for free, yet

[tiborv]

Here is the interface that replaces the SI9241AEY with transistors, for those who want to build the interface and not able to get that ISO transceiver.

Attachment 13141

Regards!

Thank you!

[tricoredc17]

Has anyone programmed GAL system programmer VP-590?

[Qwarz]

Has anyone programmed GAL system programmer VP-590?

I have not used VP-590 but VP-290 for GAL programming.

[tricoredc17]

I have not used VP-590 but VP-290 for GAL programming.

What exactly the system you choose?

[Qwarz]

I have been using Windows XP (32-bits) with Wellon softawre in ver.: 4.3.3 (2011-11-28)

[tricoredc17]

What you choose gal in wellon

[Qwarz]

What you choose gal in wellon

I choose: Manufacturer: Lattice, device: GAL16V8D*20PL

[tricoredc17]

What Bin programmed?

[Qwarz]

What Bin programmed?

I have bin using not bin but jed file

[tricoredc17]

Can you litter the JED?

[Qwarz]

Can you litter the JED?

I can of course

[GoodPuppy]

Had problem today, got VW polo 2001, reads all other controllers ok but not 01 ? any ideas please.
Address 01
Protocol: ????
Controller:
Note: Can't Synch Baud Rate
Address 03
Protocol: KW1281
Controller: 6X0 907 379 B
Component: ABS 30 IE CAN V004
Coding: 05603
Shop #: WSC 00788
Skipping Address 15-Airbags
Address 17
Protocol: KW1281
Controller: 6N0 920 904 D
Component: KOMBIINSTRUMENT BOO V09
Coding: 00441
Shop #: WSC 65793
Address 19
Protocol: KW1281
Controller: 6N0 909 901
Component: Gateway K<->CAN
Coding: 00022
Shop #: WSC 00788

Is not this year 2001 a chipped ecu; can not be flashed...

[martin84]

Hello,
My friend bayed vcds 10.6.4 clone and bricked it.
Its looks like genuine interface!!!
Hardware is different than on this forum listed,
it has :
atmlh134 you can erase it as 93c46
Before programming atmega162 you need to remove
STC11F01 security chip!
Thats all, it works!