VAG-COM/VCDS EVERYTHING

[superbpraha]

Hello,

I have VCDS 11.11 with the cable HEX-CAN.

if someone have a prolem, I can help him.

[mattydr67]

Hello,

I have VCDS 11.11 with the cable HEX-CAN.

if someone have a prolem, I can help him.

Do you mean VCDS 11.11.0 or 11.11.1 or 11.11.2 or 11.11.3
Which version do you mean when you said 11.11?

Thanks
Good luck

[tracera6]

I suppose that he needs for English version because he's from Romania ( I suppose so ) and there's no VCDS 11.11.3 in Romanian.
And of course this is not for free how the most ppl wants.
Good luck

PL=Polish Version

[mattydr67]

PL=Polish Version

Mate I suppose that you don't follow me.
I said that that guys it is from Romanian and he need English version of VCDS because Romanian version 11.11.3 there's not yet.
I know very well what PL means, it is not necessary to tell me.
But he will not understand anything in polish even you give him your softwear
Good luck

[amaflo]

Help.
I need to win7 64-bit loader for VCDs 11.2.0.
Thanks.

[mattydr67]

Help.
I need to win7 64-bit loader for VCDs 11.2.0.
Thanks.

Mate
The loader for VCDS 11.2 it is the same for all OS
I mean it works on 32 or 64 bit and it works in XP, Vista and 7 as well
Good luck

[tr3ce13]

have you a name of a loader that can use delay before patching ?

Thank

with pmaker can resume process before start patching, dont need delay

only for x86 binaries of course

[Alexu Alex]

BUNA ZIUA .SUNT NOU

[Alexu Alex]

HELLO ARE NEW, WELL FOUND VAM

[andrey_brest]

I have a loader for RL at 11.11.0. I need a monitor from 11.11.3 HEX-USB + CAN and HEX-COM + CAN...

[tk500]

I need a monitor from 11.11.3 HEX-USB + CAN and HEX-COM + CAN...

and I need it.

[andrey_brest]

and I need it.

and HEX-COM + CAN...

[bat21]

and I need it.

I have such a thing

[tr3ce13]

Any one program atmega with avrdude??
One click and program all

avrdude -c usbasp -p m162 -u -U flash:w:flash.hex -U eeprom:w:eeprom.hex

It works with flash.hex and eeprom.hex in "Intel Hex" format but dont know how to program fuse bits

low, high, extended and lock must be something like this but calibration have no idea

...... -U lfuse:w:0xcd:m -U hfuse:w:0x9c:m -U efuse:w:0xf9:m -U lock:w:0xcf:m

After program flash and eeprom extreme Burner read this fuse CD DC F9 FF FFFFFF55 (low high extended lock calibration)

[KenshinPT]

Any one program atmega with avrdude??
One click and program all

avrdude -c usbasp -p m162 -u -U flash:w:flash.hex -U eeprom:w:eeprom.hex

It works with flash.hex and eeprom.hex in "Intel Hex" format but dont know how to program fuse bits

low, high, extended and lock must be something like this but calibration have no idea

...... -U lfuse:w:0xcd:m -U hfuse:w:0x9c:m -U efuse:w:0xf9:m -U lock:w:0xcf:m

After program flash and eeprom extreme Burner read this fuse CD DC F9 FF FFFFFF55 (low high extended lock calibration)

Use instead eXtreme Burner - AVR. It's easier!