VAG-COM/VCDS EVERYTHING

[teerak2uk]

HELLO I am francais who can help me has lira and to schedule(program) atmega and fti?
I possede April usb I how look for to read and has to schedule(program) atmega 162 and the fti can help me?
What are the programs has to use?
Thank you for reponse

First post pictures from both sides of pcb from your vcds cable

[master933]

I look for the cablage to read atmega and the fti

Thank you

[Nej]

I can help you translate if you want. Je peux t'aider ? traduire tes messages si tu veux, ils ne sont pas tr?s claires pour le moment.

[Stein1987]

test plus 20zeichen

[cpsservice]

mange tak den var til stor hj?lp

[Arno]

VCDS with different language:

Vag-Diag : VAG diagnostic tools

[XPS]

VCDS with different language:

Vag-Diag : VAG diagnostic tools

But free promised updades can and to not be, earlier the bought adapters any more do not work with 11.11.4 software.
Not all sellers constrain promises...

[Arno]

But free promised updades can and to not be, earlier the bought adapters any more do not work with 11.11.4 software.
Not all sellers constrain promises...

I got update 11.11.4 German free without problems.

Update for English version must be paid.

[aminebot]

But free promised updades can and to not be, earlier the bought adapters any more do not work with 11.11.4 software.
Not all sellers constrain promises...

I got a small problem with this update , but we started sending this update 1 week ago.
send me your email by PM.

[sky59]

Originally Posted by beriv
Hello. I need some help regarding the VG.B 2011.07.01 FTDI 232BL interface if you don't mind.
It showed unregistred, that's why I tried to update 1.92 FW.
I connected it to an Atmega 162 chip (based on a description I found). It had a continuous red light, but it stopped a bit later.
I decided to wait a bit, but nothing happened.
When I started to read with with the "pony-prog" is showed "device not found".
In the meantime I found an other picture\description on the net which had no gal chip at all, but it had an older cicruit board "VG.A".

Shall I try to flash based on this second description, or do you have any idea?

Thanks for your time, waiting for your answer.

http://www.digital-kaos.co.uk/forums...cds-no-gal.rar

ImageShack***174; - Online Photo and Video Hosting

If you have a BL chip you don't need to remove or reflash the GAL.

But you need to remove the STC chip, a resistor and the transistor.

Then, reflash FTDI232BL and ATMEGA.

Good luck.

It is a pitty that user borysgo2 uses other's feather to make himself look nicer.......

no GAL solution was developed by me and first published long long time ago on garageforum.co.uk .......

I did it for all people not only for borysgo2.......

[xoom]

Is that solution works well? Becouse i think that it should be there .. its like doing some de/multiplexing thing.. But im not studied it very well So ignore this post if its nonsence

[sky59]

Is that solution works well? Becouse i think that it should be there .. its like doing some de/multiplexing thing.. But im not studied it very well So ignore this post if its nonsence

look at the attached photo and its date, chinese even started to produce them without gal

[xoom]

That doesn't mean that its better it's mean it's cheaper
i think AGK can explain more what this PLD does

[mattydr67]

Guys
Mr. Sky59 it is the owner of this solution for the interface whithout GAL
The chines copyed his solution and make now an interface without GAL
But as Mr. Xoom said the solution it is cheaper but this solution cannot repalce all GAL functions ever
Good luck

[magadan]

look at the attached photo and its date, chinese even started to produce them without gal

Chinese use not your decision. Chinese changed a flash atmega.
In these a cable won't suit flash to the old version.