VAG-COM/VCDS EVERYTHING

**roman_auto** · 25th January, 2015, 10:24 AM

Hi All
I Jusy order Vcds version 12.12.1 with France language in mistake, can some one know what need to do, need it in English, do i need to download software or mode on the France one.

**PhoenixRSC** · 26th January, 2015, 05:43 AM

Hello roman_auto,

With VCDS chinese clone interface, you must only use the install executable that come with interface on CD-ROM.
There is a risk to block the interface if you try an another install executable.

**megasudan** · 26th January, 2015, 05:48 AM

Dear this is Chinese version and. U work with it and ur Internet was open so iin this case it will be damaged
Or u try to update throw net this what I know
Ihope if I can help u more

**zodiname** · 26th January, 2015, 02:07 PM

Reflash atmega for 12.12.0 english

**roman_auto** · 27th January, 2015, 08:17 AM

Reflash, to read it with Upa and need to write some file to it , that what you mean

**dimet** · 27th January, 2015, 12:25 PM

Which is the best chinese clone version of vag com good working?

**teerak2uk** · 30th January, 2015, 06:28 PM

Originally Posted by dimet

Which is the best chinese clone version of vag com good working?

Maybe pm mattydr67

**radu2000v** · 4th February, 2015, 08:42 AM

Thanks guys for all informations posted here.
Photos from my interface before and after removing the chip U9 (STC12C2052).
Upgraded to 11.11 version, it's working.

**liviudiaconu** · 16th February, 2015, 09:14 AM

who can help me for writting a loader?

**DrWilly84** · 19th February, 2015, 01:22 AM

Hi,

after a long time reverse engineering, I found a solution for change a unregistered serial to a whitelist serial (activated).
This Method works without a HW Programmer, wh opening the Interface, without any soldering.
Updates works too :-)
Maybe some Members suspect my Method...
One little hint for you, it works via BL...

I'm thinking on it to make it not open source. Reasons should be clearly...
Maybe I'll share with few users here, if the had other interesting information for VCDS and other tools. Who did what, please PM.

Sorry for my bad English, I'm not a natural speaker.

Regards
DrWilly

**antwnhszr** · 19th February, 2015, 10:30 AM

herllo all . today i find on my bench one cable from vagcom.it's vagcom 7094 but i don't work for any time.i reprogramm the atmega with dump for 11.11.0 vershion and the cable regognize the computer very well.i need litle help for someone guru on the vagcom cable because i open the cable and i see the some cable's inside is cut in....any one know how the connection from psb to obd2?.....i post some foto's here.
regard's

**liviudiaconu** · 20th February, 2015, 07:40 AM

You have the schematic and on your photo have 7, 15 of OBD and "XXX".

Verify with an ohmmetter what pad is directly linked on that point, that pad must be pin 16 OBD.

Look on the schematic and maybe you'll see more.

LE>>.off, i don't know how to erase first photo, from edit windoww i erased but remain in little window..
So, the good photo is with "7" line fragmented.

LLE:

K1 short to gnd can be reesistor between +12V bat and pin 6 of SY9241 interrupted or CI defective..

Look on yours K Line CI, is possible to be another type...

**ionescudan** · 22nd February, 2015, 06:59 AM

someone cood help to reprogram my vcds,i HaVE VAG COM 11.11,and chip from pcb is Gal16V8,93c56,atmel ,mcp 2515,ftdi Ft23 dbl and TJA 1050.I need dump and ftdi zip files.And i need exact steps