VAG-COM/VCDS EVERYTHING

**pepeEL** · 30th August, 2017, 07:42 AM

I have cabel on chip BL and looks working ok. But with now one problem. I can not connected to Audi A4 2013 to Parking Assist also on channel 10 and 76.

CABEL ON CHIP FT232BL not working correct with all cars. With some work ok.

**1 6 D** · 30th August, 2017, 02:24 PM

pepeEL, this A4 can have PDC module build-in BCM1

give me coding of 09 module in PM

**pepeEL** · 30th August, 2017, 08:32 PM

This car is my friend. Now i can not read it.
PDC in this car is in module 09 in VCDS ? And what is BCM1 ?

**eliotroyano** · 31st August, 2017, 02:49 AM

Originally Posted by liviudiaconu

Is 44 with BM/BL.
Kolimer affirm V2 work on BM/BL too. Some persons affirm not work.
You will try and will see.

In my case it does not work.

**pepeEL** · 1st September, 2017, 09:00 AM

For me on BL works ok.

**bircaboy** · 1st September, 2017, 09:32 AM

Work on my old BM cable.

**xoom** · 2nd September, 2017, 09:03 AM

Tryed to read fault codes or do SRI reset? or just pressed test in Options window?

**pepeEL** · 4th September, 2017, 07:27 AM

Read and clear fault codes for me works ok and also TEST in option windows also is OK

**xoom** · 4th September, 2017, 01:48 PM

airbag.jpg immo.jpg
Played a bit more.. tryed to change PID but same results

**pepeEL** · 8th September, 2017, 06:36 AM

Originally Posted by eliotroyano

In my case it does not work.

Originally Posted by xoom

airbag.jpg immo.jpg
Played a bit more.. tryed to change PID but same results

Hi all
NEWS NEWS NEWS
I test my cabel HW 0x44 on chip FT232BL on other car. I test on VW Tiguan 2008. Not working correct. When read fault codes it generate in this cars in all modules more and more errors(fault codes) and cars not working correct and enginee go to any emergency mode.

KOLIMER i confirm that cabel on FT232BL not working FULL with all cars. But with my Seat Exeo 2010 works ok and no generate errors and fault codes. But on Tiguan 2008 not working correct.
Please help us.

I have a question
If i have FT2323BL i can only desolder and replace it with FT232RL ? Or any electronicals i also must change if i want change FT232BL ?
Because i think to change on my cabel only chip FT232BL to FT2323RL and after that maybe cabel start working correct with all cars.

I buy my cabel with version 11.11.5 EN and PL and in previus it working ok. But now i dont have epprom and flash to go back. Anybody has ? and can share it.
Fantomel please give me link to your mega becuase i see on other forum that you have any other dumps...

**vaicekas** · 9th September, 2017, 06:13 PM

Originally Posted by pepeEL

Hi all

Because i think to change on my cabel only chip FT232BL to FT2323RL and after that maybe cabel start working correct with all cars.

How do you want to change completely different microchips? If you really want - you can do this, but is it worth it?

FT232BL.jpg FT232RL.jpg

**szantis** · 11th September, 2017, 01:04 PM

Hi , i have a question about new china clone.Which of these interface can be programmable ? I need buy smt, but these PCB looks different.
1. https://www.aliexpress.com/item/10pc...830906052.html
2. https://www.aliexpress.com/item/10PC...832331129.html

**xoom** · 11th September, 2017, 05:03 PM

Originally Posted by szantis

Hi , i have a question about new china clone.Which of these interface can be programmable ? I need buy smt, but these PCB looks different.
1. https://www.aliexpress.com/item/10pc...830906052.html
2. https://www.aliexpress.com/item/10PC...832331129.html

First one.. with ATmega162

**pepeEL** · 13th September, 2017, 09:30 AM

Originally Posted by vaicekas

How do you want to change completely different microchips? If you really want - you can do this, but is it worth it?

FT232BL.jpg FT232RL.jpg

You have right

But Kolimer this not working correct on chip BL. Works on some cars but on some not working and generate in car modules more and more errors(fault codes)