VAG-COM/VCDS EVERYTHING

[Resko]

Try to connect the interface directly to 12V/GND and retest.

I just tried and got same result. I conncted directly to 12v and pressed test in VCDS it says interface not found. The led is lit up in green color. Directly after connecting to 12V the led is red for a brief moment and then swtiches to constant green. Any other ideas?

[networkers]

i have flashed succesfully with flash and eeprom from 6.1 loader.

You have flashed your interface by "VAGCOM_EEWriteLang.exe" orUSBasp? And we are talking about the english version?

Maybe you have to update your FTDI-Chip, see info.pdf?!

[Resko]

You have flashed your interface by "VAGCOM_EEWriteLang.exe" orUSBasp? And we are talking about the english version?

I used usbasp with the included Project in 6.1 loader.( for 44 hw ) I downloaded multi language installer 17.8 but vcds seem go be in English.

[networkers]

This is 100% org. 17.8.0-Installer in english, give them a try...

http://www.share-online.biz/dl/ZAWI9R6PGT

[Fabio89]

My friends

Does any clone version working with New Polo/Virtus (MQB) ? Anybody has tested? Because my fake "Hex-V2" from China didn't works and Rosstech said only Genuine Hex-V2 will work on this plataform (not even genuine Hex-Can works).
Hex-v2.JPG

[adicristi]

I think I burn my interface. Even with UsbAsp I cannot repair. Do you know some good clone with AT162?

Sent from my Mi A1 using Tapatalk

I tested with 3 cars. Same error. I think I have an electrical problen...What I should change on the PCB?

[Tib82]

Now I'm using Kolimer's 6.3 full package for 18.2 and it works proper

But if I wanna downgrade my cable to 17.8 how will I now which package will good this
I found the followings: v1-full , v2.7-full , v4-full

Can somebody tell me which version of \/€Đ$ use these packages?
Is there any way to check a BIN/HEX files about it's supported \/€Đ$ version?


Thanks!

[belkor]

adicristi did you use MProg?

[belkor]

Tib82 can use kolimer v6.1

[kaalis]

But if I wanna downgrade my cable to 17.8 how will I now which package will good this

V6.3 will also work with 17.x

[Tib82]

V6.3 will also work with 17.x

If I know right the v6.3 supports maximum only 2 languages (English + 1 additional), but my previous 17.8 cable was a multi lang. So I think that used a previous version of the BIN/HEX file. What is your opinion about it?

[Fabio89]

I have this interface. Is it chinese crap one, right ?
Foto 21-08-2018 17 20 27.jpgFoto 21-08-2018 17 20 33.jpg

Could you guys recommend me(post a link to buy) a good one that i can upgrade easily with VAGCOM_EEWriteLang.exe"
Do i need buy USBASP (i'm really noob) ?
Thanks

[kaalis]

but my previous 17.8 cable was a multi lang.

Was it atmega162 based?
v6.3 supports English + 15 different languages (yes, I counted options from dropdown). Are you switching to other language every 10 minutes?
Reflash loader and use other language.

[Tib82]

... Are you switching to other language every 10 minutes?
Reflash loader and use other language.

Of course not But one of my friends wanna use it with German and Hungarian languages and it supports Eng+Ger or Eng+Hun. So thats why the 17 multi lang should good for him

So I still got no answer for the package versions:

• The v1 and v2.7 contains only 1 eeprom for 0x44 and 1 for 0x46 and the v4 and v6.3 contains eeprom for each languages. Is it means that the v1 and v2.7 are multi langs?
• Can somebody tell me which version of \/€Đ$ use the v1, v2.7 and v4 packages?
• Is there any way to check a BIN/HEX files about it's supported \/€Đ$ version?

[networkers]

I have this interface. Is it chinese crap one, right ?

Unfortunately yes! No Atmega162 chipset , no update, maybe no K(KL)-Line support.
Read some pages backward and you will find a good interface from obd2cartool.com.