VAG-COM/VCDS EVERYTHING

[networkers]

But one of my friends wanna use it with German and Hungarian languages and it supports Eng+Ger or Eng+Hun.

Go and get another good cable for 25 EUR and you are done :-)

[Resko]

This is 100% org. 17.8.0-Installer in english, give them a try...

http://www.share-online.biz/dl/ZAWI9R6PGT

Thanks networkers, i tried it, still the same result unfortunately. I even updated the atmega with 6.3 flash and hex. And also updated ftdi with mprog. Any other ideas?
The interface worked previously with old 11.11 VCDS and got disabled when connected to internet. I will check the pcb if there are some issues with it.
It is strange that it is detected correctly when not connected to 12V but as soon as 12v is applied interface is not found by VCDS.
I need VCDS right now to investigate an issue with park sensors on my Tiguan.

[adicristi]

Link?

Go and get another good cable for 25 EUR and you are done :-)

Sent from my Mi A1 using Tapatalk

[alexm1]

Unfortunately yes! No Atmega162 chipset , no update, maybe no K(KL)-Line support.
Read some pages backward and you will find a good interface from obd2cartool.com.

Removing ARM cip and soldering Atmega on pcb will be a chance to make it work again? I see on pcb a place were will fit Atmega, wrigth?

[networkers]

Maybe this one:

http://www.obd2cartool.com/vagcom-16...version-p-1266

You need an USBASP programmer to update/reflash.

[shkumbata74]

17.8.0 work VCDSLoader_v5

[networkers]

Thanks networkers, i tried it, still the same result unfortunately. I even updated the atmega with 6.3 flash and hex. And also updated ftdi with mprog. Any other ideas?

What does "VAGCOM_HWType.exe" and Windows System/Hardwaremanager show about your interface?

HW-Type-0x44-FW196.jpg

System-Hardware-IDs.jpg

[belkor]

What does "VAGCOM_HWType.exe" and Windows System/Hardwaremanager show about your interface?

Attachment 550793

Attachment 550794

no attachments

[xoom]

Thanks networkers, i tried it, still the same result unfortunately. I even updated the atmega with 6.3 flash and hex. And also updated ftdi with mprog. Any other ideas?
The interface worked previously with old 11.11 VCDS and got disabled when connected to internet. I will check the pcb if there are some issues with it.
It is strange that it is detected correctly when not connected to 12V but as soon as 12v is applied interface is not found by VCDS.
I need VCDS right now to investigate an issue with park sensors on my Tiguan.

You can diagnose Park sensors without diagnostics just by ear.. if you get close and listen to them they make sound (tik tik tik tik tik....) that's working sensor (atleast BMW sensors do that)

[Tib82]

Go and get another good cable for 25 EUR and you are done :-)

Wow one more reply without any answer or helping hint I don't wanna buy a new one, I wanna reflash it with the right contetnt.

Is there anybody here who know something about these questions?

• The v1 and v2.7 contains only 1 eeprom for 0x44 and 1 for 0x46 and the v4 and v6.3 contains eeprom for each languages. Is it means that the v1 and v2.7 are multi langs?
• Can somebody tell me which version of \/€Đ$ use the v1, v2.7 and v4 packages?
• Is there any way to check a BIN/HEX files about it's supported \/€Đ$ version?

[Resko]

What does "VAGCOM_HWType.exe" and Windows System/Hardwaremanager show about your interface?

Mine looks like this:
HWtype.jpgwininfo.jpg

[alexm1]

I did not remember the page were was shared last dumps, but look for the latest loader v6.3. There you will find pairs eeprom +flash ×44.×46. Take them and use it as a pair , not combined.

[hid3]

Wow one more reply without any answer or helping hint I don't wanna buy a new one, I wanna reflash it with the right contetnt.

Is there anybody here who know something about these questions?

• The v1 and v2.7 contains only 1 eeprom for 0x44 and 1 for 0x46 and the v4 and v6.3 contains eeprom for each languages. Is it means that the v1 and v2.7 are multi langs?
• Can somebody tell me which version of \/€Đ$ use the v1, v2.7 and v4 packages?
• Is there any way to check a BIN/HEX files about it's supported \/€Đ$ version?

Why do you keep diggin up old versions? Have you tried Windows 98? LOL. Forget about the previous versions. Each Kolimer's version is a significant improvenet over the old one; once new one is out, the previous ones should be forgotten.
Having said the above, use Kolimer's v6.3 or v7.0 with any VCDS version, starting from 17.1.3 till 18.2.1 and enjoy.

[belkor]

my new clone vcds hex v2

[networkers]

Mine looks like this:

Are you sure, that you have written the right FTDI file? Check what kind of FTDI-Chip is on PCB. I guess you need to write "ftdi_mprog_BMBL.ept" with mprog.

Then you will get:

USB VID=0403
USB PID=FA20

Manufacturer=Ross-Tech
Product=Ross-Tech HEX-USB