VAG-COM/VCDS EVERYTHING

[hid3]

Hikage, your cable is 0x44 HW. There is FTDI - it's FT232BL/BM with external EEPROM.

[kospoz]

I have one sklad cable and i have updated to 18.9.i saw many times on uds protocol when i hit engine writes very quickly number from ecu but takes long time to connect . sometimes searching and searching and never saying retrieving slaves.i have reinstalled it again but same thing.other times working good.any tips for this?

[file1]

Hi Everyone,
I have vcds hw 0x44 and tl866 . Can somebody gave me the .jed file for gal/atf or tutorial how to program atf memory?

Thank you

[whatispro]

Hello,

Could anybody tell me what is the difference berween the FTDI FT232RL and the FTDI FT232RQ , please ?

What is the best one and why ?

Thanks in advance.

Cheers

[AceDuk]

Hi to everyone,

I have few questions:
Can VCDS still match(program) immobilizer (IV,V) from [17 - Instruments] and also do i need 4 digit pin like old IMMO2 and IMMO3?
If yes is it same procedure like IMMO2 and IMMO3?
More specific i'm asking for GOLF MK5, Seat Leon 2008, Polo 2007.

Thank you

[kowalwalcz]

Hi to everyone,

I have few questions:
Can VCDS still match(program) immobilizer (IV,V) from [17 - Instruments] and also do i need 4 digit pin like old IMMO2 and IMMO3?
If yes is it same procedure like IMMO2 and IMMO3?
More specific i'm asking for GOLF MK5, Seat Leon 2008, Polo 2007.

Thank you

Special tools, obd. Vcds not working

Wysłane z mojego EML-L29 przy użyciu Tapatalka

[AceDuk]

Special tools, obd. Vcds not working

Wysłane z mojego EML-L29 przy użyciu Tapatalka

So VCDS cannot program key transponder for those cars? GOLF MK5, Seat Leon 2008, Polo 2007

[Col19]

Hi friends

My mission is to install the Kolimer project on the Hexv2 map, here are the images of the map, thank you to everyone for your contributions, your help and your information. Respect to the DigitalKaos community.


Attachment 591471

Attachment 591472
Look "Hex V2"

20190130_002538.jpg
Here you have the model AES

20190126_011537.jpg
20190126_011747.jpg
20190126_011856.jpg

Shame on those who sell this work without permission or even without offering a commission to
☆ Kolimer ☆

Thanks again to everyone for your sharing and your support for the whole community "DigitalKaos" Respect for ☆ Kolimer ☆ the unforgettable man in the world.

[1nteger]

Hi everyone.

I took a vcds 18.9.0 with install cd and loader from aliexpress. I installed vcds to my pc without antivirus and internet connection. I plugged the cable to car and my pc. Test is ok. No fail k1 k2 and can( can sometimes not ready) I have always ‘communication error’ and ‘no response from controller’ faults

I conmected to ecu than after 5 seconds. Communication faults indicated on the pc
What do you think about it?
Any advices for fix the problem?

edit for the picturesa1af45fc-eeb1-4f84-8c21-7bd2edadc12d.jpg4d0f863d-0ed5-4586-99f6-aa6627e9bfe9.jpg48d66eb9-a027-4b1b-8f94-793c270074f9.jpgcf5281fd-53f3-4e4b-b368-7fdb5f201b1b.jpg


CAN:OK and sometimes CAN:not ready ?

ftd2x.dll ı found it. what will ı do with this dll? like cracking old games ? copy to vcds file foldeR ?
Like cracking old games? Copy to vcds file folder?

[hid3]

^^^^^
Well, that is one of the reasons why it's always better to buy from a trusted store, like OBD2CarTool rather than some random Aliexpress seller which sells "almost the same stuff" for much cheaper.

Guys, you need to understand that there is a reason why it may be cheaper. ATmega162 and FTDI chip themselves cost almost half of the cable's price. But there are even more components inside. Sometimes you come accross fake components, missing components or sth similar when getting the "same or very similar" cable from unknown source. I don't believe that for one living in France a few extra bucks for a known-good cable make any sense. Your minimal montly wage is 1150 EUR, isn't it? Go ahead and compare it to the rest of EU countries.

Anyway, it's up to each person to decide what he wants to buy. But sometimes you get what you pay for.

[liviudiaconu]

Hi everyone.

I took a vcds 18.9.0 with install cd and loader from aliexpress. [...]
Any advices for fix the problem?

Photos with both sides of PCB?

[1nteger]

I dont know how can ı upload the picture this website first help for uploading picture and friends sorry about bad english ı cant talk very well in english

HEX+Can one side and other side VAG 189

[liviudiaconu]

Repeat:

Photos with both sides of PCB? NOT with case..

[whatispro]

Hello,

Could anybody tell me what is the difference berween the FTDI FT232RL and the FTDI FT232RQ , please ?

What is the best one and why ?

Thanks in advance.

Cheers

[Col19]

^^^^^
Well, that is one of the reasons why it's always better to buy from a trusted store, like OBD2CarTool rather than some random Aliexpress seller which sells "almost the same stuff" for much cheaper.

Guys, you need to understand that there is a reason why it may be cheaper. ATmega162 and FTDI chip themselves cost almost half of the cable's price. But there are even more components inside. Sometimes you come accross fake components, missing components or sth similar when getting the "same or very similar" cable from unknown source. I don't believe that for one living in France a few extra bucks for a known-good cable make any sense. Your minimal montly wage is 1150 EUR, isn't it? Go ahead and compare it to the rest of EU countries.

Anyway, it's up to each person to decide what he wants to buy. But sometimes you get what you pay for.

Hi friends

HID3 friend, i did not know that Aliex ... sell less good quality products than OBD.diy, desolate if i made a mistake, you're no longer experimenting, i know that chips are mostly copies,

Personally i replace the chips according to the pictures shared by the great friends of the Net like Fantomel ...

Dear HID3, my goal here was to help the community of Kolimer and his team "You". As we can take advantage of Kolimer's work, i wanted to do a little bit of service to this great DigitalKaos community, I apologize if I made a mistake.

Thank you for all that you do for us the peoples of the world. Finally, money is not a problem, only i did not want to pay a few more Euro to receive the same final product but i was wrong, if those of OBD.diy are better, then it is the place to buy, if you advise is that you know, thank you again and I will try to delete the link.

Good continuation.