VAG-COM/VCDS EVERYTHING

**liviudiaconu** · 25th February, 2019, 06:27 PM

Found cheaper https://www.ebay.com/itm/1-3A-3-3V-5...e/153389005472

**LostAngel** · 25th February, 2019, 07:09 PM

Originally Posted by LostAngel

Hello!
Can you tell me if is this good?

Actual version 16.8.3 EN+RO
And can I update it with kolimer's package to 18.9?
easy or difficult?
Thank you in advance for your answers!Attachment 598708 Attachment 598709 Attachment 598710 Attachment 598711

Unfortunately, I failed but to lose my old licenses!
Hope to be more successful if I buy a programmer.
Unfortunately, I only managed to lose my old licenses!

**hid3** · 25th February, 2019, 07:17 PM

LostAngel, you do NOT need a programmer for your interface... You did something wrong!

**hid3** · 25th February, 2019, 07:20 PM

Originally Posted by liviudiaconu

Found cheaper https://www.ebay.com/itm/1-3A-3-3V-5...e/153389005472

Interesting device. The description says it's "sex Stable". If I install this one, will it guaranteel regular and stable sex? Any experience with that?

**Gimse** · 25th February, 2019, 07:27 PM

Originally Posted by pocinas

Yes.. loader v8 but cant share public. Need ask first person who give me this.

Something new about loader v 8?

**hid3** · 25th February, 2019, 07:32 PM

Guys, what do you expect from the v8 loader?
What features does your v7.2 lack?

**p1et** · 25th February, 2019, 09:37 PM

Hey guys, is it possible to program auxiliary heating remote control for Audi A6 C7 with VCDS? I made some research and only information I was were about older (C6) model that we can program by ourselves without any software, just unplug module for 5s, reconnect and press remote button but I cannot find any information about programming it to C7 model so I thought maybe it is possible with VCDS?

**Fabio89** · 25th February, 2019, 09:51 PM

Originally Posted by hid3

Guys, what do you expect from the v8 loader?
What features does your v7.2 lack?

MQB MY2019+ support models,

**liviudiaconu** · 26th February, 2019, 07:13 AM

Originally Posted by hid3

LostAngel, you do NOT need a programmer for your interface... You did something wrong!

He need external programmer. His cable writen with another lockbit.

**liviudiaconu** · 26th February, 2019, 07:42 AM

Originally Posted by liviudiaconu

Link for this? I only another converters find. And not at .3USD
Thank you

A little help?
I saw this devices having

1. More presets or/and ADJ. Is better to let on ADJ or cut copper and solder on 5V?
2. What mean "ENABLE" pin? Must GND or +?

**mihairomnet** · 26th February, 2019, 09:49 AM

Originally Posted by hid3

Guys, what do you expect from the v8 loader?
What features does your v7.2 lack?

Solving "CAN Not Ready" for version 18.9.1 Romanian, Hungarian

**thenutzu** · 26th February, 2019, 10:10 AM

Waiting also v8 loader for 18.9.1 ROJ. Thanks

**karrott** · 26th February, 2019, 04:26 PM

Hello all,
I write here because I bought 3 cables from aliexpress (this link ) and 2 of them are not working. 1 is working perfect, connects properly with my PC and cars. 2 cables are not working (one cable when connected to PC only shows: "interface found" but after connecting with OBD2 shows: "interface not found" and one cable always "interfecae not found" with or without connecting into USB/OBD).
I did some research and found this forum and I hope somebody will help me because I am newbie with this

I know that this is possible to fix these broken cables but I really don't know anything about programmers or flashing OBD cables.
Can anyone explain to me step by step how can I fix these cables? I would be very grateful for any help

pic2.jpg pic1.jpg

This is my cable inside (after disassembling cover). VCDS Hex V2 18.2 English and 18.2.1 Polish version.

**Roma77** · 26th February, 2019, 05:02 PM

Originally Posted by karrott

Hello all,
I write here because I bought 3 cables from aliexpress (this link ) and 2 of them are not working. 1 is working perfect, connects properly with my PC and cars. 2 cables are not working (one cable when connected to PC only shows: "interface found" but after connecting with OBD2 shows: "interface not found" and one cable always "interfecae not found" with or without connecting into USB/OBD).
I did some research and found this forum and I hope somebody will help me because I am newbie with this

I know that this is possible to fix these broken cables but I really don't know anything about programmers or flashing OBD cables.
Can anyone explain to me step by step how can I fix these cables? I would be very grateful for any help

pic2.jpg pic1.jpg

This is my cable inside (after disassembling cover). VCDS Hex V2 18.2 English and 18.2.1 Polish version.

Hi, every cable has its own program, you probably used all three cables with the same program, read a few pages back and you will solve your problem.
In this thread there would be much less pages if you first read and then ask a question. IMHO

**karrott** · 26th February, 2019, 05:32 PM

These cables are not my first ones with 18.9en and 18.2pl and worked well (always the same software). Only these 2 are not working and I don't know why. In this thread is a loooot of informations but I know there are few type of cables and some of them need programmer and some can be fixed without extra devices. I write new post because I thought somebody will help me with my type of cables (too much mixed informations here and after spending 2 hours here I still don't know how to fix them).