VAG-COM/VCDS EVERYTHING

[tino3]

So I tried it and everything I thought was good. VCDS 18.9.0 EN and 18.9.0 CZ installed, running via loader 7.2 and also the cable was updated via ..... WriteLang, then update to 1.96 and all OK
Thank you

[LostAngel]

Unfortunately, I failed but to lose my old licenses!
Hope to be more successful if I buy a programmer.
Unfortunately, I only managed to lose my old licenses!

Hello! I managed to restore the interface with a programmer and VCDSLoader!
(@KOLIMER! WHEREVER YOU ARE, GOD BLESS YOU)
We made all sorts of mistakes, but in the end we succeeded!
The big problem was the pin differences between ATMEGA 162 and ATMEGA 162AU
Unfortunately, it does not work on "can" too!
If anyone knows why, please explain it to me!
Thank everyone for support and guidance!hid3; liviudiaconu;
We made all sorts of mistakes, but in the end we succeeded!The big problem was the pin differences between ATMEGA 162 and ATMEGA 162AUUnfortunately, it does not work on "can" too! If anyone knows why, please explain it to me!Thank everyone for support and guidance!hid3; liviudiaconu;

[Roma77]

Please write the differences in the pins ATMEGA 162 and ATMEGA 162AU that you found
I think that you have mixed the case of the microcircuit PDIP-TQFP

[LostAngel]

Please write the differences in the pins ATMEGA 162 and ATMEGA 162AU that you found

162.jpgatmega 162AU.jpg
pin 5 and pin 6

[Roma77]

162.jpgatmega 162AU.jpg
pin 5 and pin 6

You confused Atmega 162 and Atmega 16, photo 1 atmega 16 Photo 2 atmega 162

[liviudiaconu]

[...]
The big problem was the pin differences between ATMEGA 162 and ATMEGA 162AU
Unfortunately, it does not work on "can" too!
If anyone knows why, please explain it to me!
Thank everyone for support and guidance!hid3; liviudiaconu;
We made all sorts of mistakes, but in the end we succeeded!The big problem was the pin differences between ATMEGA 162 and ATMEGA 162AUUnfortunately, it does not work on "can" too! If anyone knows why, please explain it to me!Thank everyone for support and guidance!hid3; liviudiaconu;

Obviously your car must have CAN (2006+), if not, Can Not Ready will appear. If your car having CAN and you used last release of VCDS 18.9.1 + V7.2 Loader=>CAN Not Ready. Use 18.9.1 FIRST Release or 18.9.0 and will work.

About A162 pinout (Roma already wrote this)

https://www.google.ro/url?sa=t&rct=j...dPmIECsMMP29om

here datasheet. Pins 5-6 are OK.


Atmega 16 having pinout 5-6 Vcc-GND

https://www.google.ro/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&u act=8&ved=2ahUKEwi45YqRpebgAhWuqIsKHTTZBIcQFjABegQ ICRAC&url=http%3A%2F%2Fww1.microchip.com%2Fdownloa ds%2Fen%2Fdevicedoc%2Fdoc2466.pdf&usg=AOvVaw0eSgD_ cMtyVbPj81vHlTU2

[LostAngel]

Thank you all for your help!
Everything works as it should!
I wish you much health and joy!
Thanks Kolimer, hide3, liviudiaconu, Roma77 etc!
God bless you all!
Thank you all for your help!Everything works as it should!I wish you much health and joy!Thanks Kolimer, hide3, liviudiaconu, Roma77 etc!God bless you all!

[tino3]

Here is the link for downloading the VCDS 18.9.0 installation in Czech.


https://uloz.to/!Uspjvr6r07zo/vcds-18-9-0-cz-zip

[Col19]

Hi friends

Many thanks to Hid3 Kaalis and the other friends for the help you bring to fans like me. Thank you Hid3 for information on the controller 7805 which is replaceable by the mini converter, i have a mini module converter, very good to know thank you friends.

As i saw questions for the power supply in 12V i would like to take advantage of it to prtager mine very simple to realize, it is enough to weld the 4 + 5 (OBD2) on GND of the transformer 220V -> 12V and the 16 (OBD2) on the transformer 12V.

20190304_151809.jpg

20190304_151904.jpg

Respect for all friends.

[Roma77]

Beta 19.1.2 ENG was released, does not work with loader 7.2.

[xoom]

Beta 19.1.2 ENG was released, does not work with loader 7.2.

"Beta 19.1 works only with Ross-Tech's current HEX-NET and HEX-V2 interfaces.
It will not work with any of our older, legacy interfaces.
Support for legacy interfaces will be included again in the next Release version. "

from release notes

[kaalis]

But that would be heart touching moment for clones comparing to genuine hex-can cables if we could also test the Beta

[fantomel]

As usual RT tries to force upgrade old interfaces when not even bugs are corrected So as far as i know from betas, code for "legacy" interfaces is gone.

[tk500]

Kolimer's loader used free from Chinese sellers accelerate this.
Hit on owners of old genuine interfaces.
Will it not be repeated with current generation interfaces in the future...

[fantomel]

I do love corporate crap, you payed 300$-500$ min for one interface that has cost of production of max 10-12$. I would love that profit also

P.S. Passwords were invented to be broken, we are human, so not perfect and from this you get what i mean regarding new crap with old mcus.