VAG-COM/VCDS EVERYTHING

[Fabio89]

Guys.

i'm having some troubles with real Hex-v2. The cable doesnt open adaptation-10 in some módulos like 03-ABS / 44 - Steering Assist ....some vehicles like Virtus (MQB-A0 plataform) even 17- instruments it doesnt open
Foto 17-03-2020 16 18 33.jpg
And Adaptation channel isn't avaliable
Foto 17-03-2020 16 18 09.jpg

Anyone knows if has something to fix it ? i'm using software direct from R$ website without any loader.

[miouser]

Fabio89

if you have original cable why are you looking for support here and not in https://forums.ross-tech.com/ ???

[Fabio89]

Fabio89

if you have original cable why are you looking for support here and not in https://forums.ross-tech.com/ ???

It is clone version.

[tk500]

That is already commented.
These clones are already blocked.

[Fabio89]

That is already commented.
These clones are already blocked.

No, it isn't.
Licence is OK. Internet always off - Blocked in firewall and wi-fi turned off

It just happens in some modules - most commum in 03 ABS and 44 Steering Assist

Same problem happens with Hex-Can clone version in Audi A4 2018 - Long coding Helper doesnt shows bit description

[bg17aw]

Guys.

i'm having some troubles with real Hex-v2.

how much did you pay?

BTW, I would still use the loader. Why not... it cannot hurt
Why risk it...

[tk500]

A green license for a long time does not mean that everything is OK.

[sonique]

Not use cd version exe file because different original rosstech
cd version download china rosstech site and not incuding many coding inforation eu cars and others

but yes many problem this hexv2 not connect many components
many times kline init faild

Guys.

i'm having some troubles with real Hex-v2. The cable doesnt open adaptation-10 in some módulos like 03-ABS / 44 - Steering Assist ....some vehicles like Virtus (MQB-A0 plataform) even 17- instruments it doesnt open

And Adaptation channel isn't avaliable


Anyone knows if has something to fix it ? i'm using software direct from R$ website without any loader.

[audiobesst1111]

resistor 120ohm between canL & canH out or ?

This hardware was ~~~~ed on a NON VAG car.
Changed LM2940 and Si9241 to have K1 & K2 ok, but LM was to hot and CAN not ready. and after that changed MPC2515, and LM temperature become normally but CAN still not ready.
Finally changed ATA with NV7342 and resistor 120ohm between canL & canH and everything is ok.
Maybe it had old problems, many burned pieces.

[motorsport]

hello every body i hoppe all you are good i am looking for sw vcds 17.8 1 and activation for work with my interface 17.1.3
Will be gratefull i need adapat my gearbox cant success golf 7
Thanks a lot

[jan4]

http://ge.tt/4mNuS623

[Earwig]

Hi there,

Looking for a bit of advice please.

Totally new to all this !

I have a VAG KKL for 409.1

I use VCDS Lite 2.1, but many features just don't work. It tells me I need a license or something to read the full system.

I managed to find an old copy of VCDS 11.11.3, but cannot get it to work at all. On COMM3 it says the port is ok, but the interface is not found. Yet in Lite 2.1 the same port is fine and it finds the interface.

Is there another copy of the software available ? Do I need a different interface ? Or am I just plain doing things wrong ? I have seen copies of the software posted here for a Polish user, so there must be copies in English I presume ? Are the days of this software being cracked gone ? Different workarounds now ?

Appreciate any help and advice anyone is able to offer :-)

Thanks.

[liviudiaconu]

VAG KKL work with VAG-COM or max VCDS Lite 1.2 with loader. Only on K Lines

For new soft must another cable named VCDS-cables with ATMEGA 162
Read in this topic.

[Jlh]

I am thinking about buying an original HEX V2. Is it possible to get the one with license for 3 cars and yet use it with many cars using the loader?

[hid3]

Yes, possible