No it isn't...Originally Posted by KenshinPT
As i said before....it was working almost perfectly...fully registered, auto-scan completes every time...I t was actually friends interface (10.6) and i had the sam that did not work...Always get message:Interface not found after plugging to OBD port...Then i tried to clone his interface onto mine...and started programmer while interface was plugged to USB...and everything gone....somewhere...it was erased/flashed/prgrammed-whatever...but it started NOT working...
Results 931 to 945 of 12803
Thread: VAG-COM/VCDS EVERYTHING
-
26th January, 2011, 07:54 PM #931Member
- Join Date
- Dec 2010
- Posts
- 48
- Thanks
- 1
- Thanks
- 1
- Thanked in
- 1 Post
-
26th January, 2011, 08:01 PM #932Member
- Join Date
- Nov 2010
- Posts
- 58
- Thanks
- 24
- Thanks
- 2
- Thanked in
- 2 Posts
.........................
Last edited by tr3ce13; 3rd April, 2011 at 02:50 PM.
-
26th January, 2011, 08:12 PM #933DK Veteran
- Join Date
- Oct 2008
- Location
- On Earth
- Posts
- 1,865
- Thanks
- 37
- Thanks
- 181
- Thanked in
- 114 Posts
reprogramm it with good dumps. Originally Posted by croatiaobd
if you cannot change the ftdi VID/PID you have to change the 93C46 and the it will work.
My freind liviudiaconu ( our mate ) just did this on an interface sent it by me.
At this interface the VID_0000/PID_0000, I could changed it to VID_0403/PID_6001 and I did the procedure then tried to use VIDPIDFIX but had an error and with MProg I couldent reprogramm the FTDI.
When I took off the interface from the USB and plugged back the VID/PID come back to the unknown device (VID_0000/PID_0000).
The solution was:
Changed the 93C46 and reprogrammed the Atmega like in the tutorial.
This is it.
Good luck
-
27th January, 2011, 10:19 AM #934DK Veteran
- Join Date
- Mar 2010
- Location
- PT
- Posts
- 408
- Thanks
- 11
- Thanks
- 23
- Thanked in
- 15 Posts
Just a little bit off topic... but I want to know if anyone knows an online store that sells IC with free shipping or with an attractive shipping fee.
I need one M93S46 SOIC and I don't wanna pay 0.50Euro for the IC and 10Euro for the shipping =)
By the way. I am in Portugal!Last edited by KenshinPT; 27th January, 2011 at 10:36 AM.
Did it help? Push Thanks below
-
27th January, 2011, 10:30 AM #935DK Veteran
- Join Date
- Jun 2009
- Posts
- 1,574
- Thanks
- 266
- Thanks
- 507
- Thanked in
- 161 Posts
hey guys...
i got an ideea, but i might be wrong as i am not good in electronics!
since the software stores blacklisted serial number, and also in the software its checked the serial, wht if someone will manage to patch that serial checking?
in theory then you will be able to use the software on any version of vcds without causing the eraseing of atmega!
ehhh...its too easy ..must be something else ...
any ideeas?If freedom is outlawed, only outlaws will have freedom!!!!
-
27th January, 2011, 12:02 PM #936Newbie
- Join Date
- May 2010
- Location
- Portugal
- Posts
- 18
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
Originally Posted by KenshinPT
Hello friend from Portugal...
Try this one.Thats where i buy electronic components.
Hope it helps you.
-
27th January, 2011, 12:07 PM #937DK Veteran
- Join Date
- Mar 2010
- Location
- PT
- Posts
- 408
- Thanks
- 11
- Thanks
- 23
- Thanked in
- 15 Posts
Farnell charges 9? for the shipping Originally Posted by hevi
Did it help? Push Thanks below
-
27th January, 2011, 12:29 PM #938Newbie
- Join Date
- May 2010
- Location
- Portugal
- Posts
- 18
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
Sorry forgot about shipping costs...because my company buy there for me...but i know they are somewhere beetwen Almada and Corroios Originally Posted by KenshinPT
Farnell charges 9? for the shipping
Did you try Dimofel or Tecnimouser
-
27th January, 2011, 12:44 PM #939DK Veteran
- Join Date
- Mar 2010
- Location
- PT
- Posts
- 408
- Thanks
- 11
- Thanks
- 23
- Thanked in
- 15 Posts
I'm gonna give them a call! Originally Posted by hevi
Thanks!
Did it help? Push Thanks below
-
27th January, 2011, 12:55 PM #940Newbie
- Join Date
- May 2010
- Location
- Portugal
- Posts
- 18
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
Here is almost all PT electronic stores
Sorry for this offtopic...
-
27th January, 2011, 01:00 PM #941Junior Member
- Join Date
- Dec 2009
- Posts
- 34
- Thanks
- 1
- Thanks
- 1
- Thanked in
- 1 Post
Hi,
take a look at the st hp (st.com) --> contacts --> distributers. There are two in Portugal!
Try to contact them and ask for free samples or price!
Best wishes
Sam
-
27th January, 2011, 01:07 PM #942Newbie
- Join Date
- May 2010
- Posts
- 3
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
hi all, someone knows if the vcds lite still going in version 1.4???
-
27th January, 2011, 01:29 PM #943Newbie
- Join Date
- May 2010
- Posts
- 3
- Thanks
- 0
- Thanks
- 0
- Thanked in
- 0 Posts
i have the blue interface and last year worked good, but my laptop failed and lost the software, it was a vcds lite edition. someone knows where i can get ti??
-
27th January, 2011, 01:52 PM #944Member
- Join Date
- Nov 2010
- Posts
- 58
- Thanks
- 24
- Thanks
- 2
- Thanked in
- 2 Posts
...................................
Last edited by tr3ce13; 3rd April, 2011 at 02:49 PM.
-
27th January, 2011, 01:53 PM #945DK Veteran
- Join Date
- Feb 2010
- Location
- B & H
- Posts
- 405
- Thanks
- 53
- Thanks
- 97
- Thanked in
- 21 Posts
As well as i can see, this thread turned to "get as many posts as you can" , the one can't edit his/her post just add some more, like using PM is prohibited. Come on guys
Bookmarks