VAG-COM/VCDS EVERYTHING

[Fabio89]

who can update HEX-V2 STM32F415 ARM ITEMS? and need Russian version, thanks

Attachment 733986
Attachment 733987

I can pay for it

I have same cable, but it shows "No ASAM data for" in practically every module at MQB-A0 plataform (Scan from Polo AW 2019)
With genuine R$ works properly
ASAM Data.JPGASAM Data2.JPGASAM Data3.JPG

and cant do any adaptation on 5F- always "Request out of Range"
Foto 24-07-2020 12 47 15.jpg

[mladen223]

Hi people!

I have VCDS Chinese clone cable.
CD supplied with cable has lost.
After HDD failure and replacement, I've struggle to make this cable work.
I've try many versions, but without success!
Test with cable connected to notebook pass well, but when is connected to car OBD, cable can't pass same test - no communication!
vc3.jpg
How to solve this?

Thx!


PS. I have some USB device for some VCDS debugging

[liviudiaconu]

Rewrite with K0l1mer's solution, test with his loader.

[marky1991]

Can be recover this cable??? is bloqued.... And windows dont recongnize the cable (show error)

is posible reflash?

[liviudiaconu]

Not Atmega, that men no.

[Lemme345]

Hi all
I just tried to download Kolima's VCDSLoader_v9.2.zip from his link https://www.sendspace.com/file/5qr55f

But my Anti Virus gives me a lot of warnings, like:
Trojan:Win32/Wacatac.C!ml
Trojan:Win32/Esulat.A!rfn
Trojan:Win32/Tiggre!plock

Is this normal, or should I keep away?

Br
Lemme

[fantomel]

Please do tell me when a hack is not reported as a virus .... sooner or later + depends on different junks of antiviruses. It's normal, take it and use it.

[Lemme345]

OK - thanks. Just wanted to make sure.

[Lemme345]

UPDATE!!!!!
Jan4 came to the rescue... It was not enough to flash the cable just connected to the PC and Car. Strange, but it had to be connected to a seperate 12V power supply, instead of the Car's 12V. Then it would flash, and it works on VCDS 20.4.1 now.


************************************************** ***********
Hi again
It seems that I could use a litte help from your guys...
I just recieved this cable today, after 7 months of waiting...: http://www.obd2cartool.com/atmega-va...hipping-p-1554
At the time of order it was with VCDS 19.6.1. It came with a little CD-Rom with the software, but I do not have a drive, so I try to get it to work anyway. According to the documentation it should come with a bootloader and be ready to update. This is what I have done so far:

Downloaded VCDS Release 20.4 from Ross-tech
Downloaded Kolima's VCDSLoader_v9.2.zip
Installed VCDS Release 20.4
Connected the cable to the car and PC
Run VAGCOM_HWType.exe to confirm connection. It was OK - reported FW 1.96 / HW 0x46 / English only / Bootloader Enabled
Copied VCDSLoader.exe into installed directory and created link.
Run VCDSLoader.exe (it renamed to VCDS.exeL as it should)

Here is the problem...I start VCDS, and it says 'First use / No config file found'. I then go into 'Options' and press 'Test'. But it comes with 'Interface: Not Found!'.

I then tried to flash EEPROM using VAGCOM_EEWriteLang.exe, and using just English language. It starts the flashing, but stops with the error 'Error flashing custom firmware'.

Any ideas of how I can get this to work would be great.

Br
Lemme

[Fabio89]

VCDS 20.4.2 ENG released

Apparently working with VCDSLoader 9.2 20.4.2.JPG (interface was not plugged into car)

real hex-v2 clone doesnt working with 20.4.2 20.4.2 v2.JPG

[Rollaz21]

Hi, i am new to this forum and need some help with vcds, I bought a hex v2 clone and it doesn't work, I managed to get a refund but I was wondering if there is any way of getting it to work, it says license revoked, i was given 20.4.1 with the cable. Thanks in advance

[obd2cartool]

I have same cable, but it shows "No ASAM data for" in practically every module at MQB-A0 plataform (Scan from Polo AW 2019)
With genuine R$ works properly
ASAM Data.JPGASAM Data2.JPGASAM Data3.JPG

and cant do any adaptation on 5F- always "Request out of Range"
Foto 24-07-2020 12 47 15.jpg

Hi, for the MQB A0 could check our DIY MQB Version

[kaalis]

Hi, i am new to this forum and need some help with vcds, I bought a hex v2 clone and it doesn't work, I managed to get a refund but I was wondering if there is any way of getting it to work, it says license revoked, i was given 20.4.1 with the cable. Thanks in advance

Not gonna happen if you not provide pcb pics.

[ccr64k]

32 bit version unpacked

[turboleak]

Guys I need urgent help!!

I have a friend that has an old clone VCDS 11.3 cable without software. He is 200km away from me and I tried to remotely check what kind of cable it has.

HWtype says the following:

VID / PID : 0403 / FA20
FT Serial : RT000001
FT Description : Ross-Tech HEX-USB
FT Chip ID : 0x19800400
FW Version : 1.84
HW Version : 0x44
Identification : TDˇ@
SN : 0x000200000053
Language : 3E - Unknown
Bootloader : Disabled

I had an old 11.11.3 installer from a chinese cable, the driver detects the cable on device manager but vcds does not detect the cable. I think this software was for cables with nec chip.
I then tried with vcds 19.6 and 9.2 loader from Kolimer and VCDS detects the cable but it reports function failure because probably of the old firmware version ( 1.84 ). As the bootloader is disabled I have no way of updating it.

So, long story short, I need an old VCDS version + loader/crack/whatever that can work with this cable. I know this is not the ideal thing, but he really needs to connect to the car and see what is going on with the gearbox of a caddy mk3 and I have no quicker way than try to make that cable work.


I would really appreciate if someone can send me, or direct me to the version that I need.