VAG-COM/VCDS EVERYTHING

**2xded** · 16th August, 2020, 03:04 PM

Are you talking about this file?

**subzdarg** · 16th August, 2020, 06:25 PM

some ppl with ARM had luck with this loader dose not work for my version arm let me no if it works for u

https://mega.nz/file/H8Z0EAaR#QxNoVG...VMo1bxGweMLyQc

**Tib82** · 16th August, 2020, 07:15 PM

Originally Posted by 2xded

Are you talking about this file?

Your link is the English latest version. Kaalis said the France (FRM) version is released.

**ZIPPO4594** · 17th August, 2020, 01:13 PM

Yes, tested with french version (FRM)

**domnulvlad** · 17th August, 2020, 08:09 PM

Hi! I'm pretty much a newbie and I have been putting off buying a diagnostics cable for far too long and I think now it's time...

I have a few questions, because I almost fell asleep while reading the first 5 pages of this thread:

1. Will the cables from the OBD2cartool DK members VIP offer (https://www.obd2cartool.com/vip-link...tubt40p5prjok5) work "perfectly" (like an original Ross-Tech cable) on a MY2000 car?
2. If yes, then is the difference between Option 1 and Option 2 in the above-mentioned offer purely aesthetic or are they different internally?
3. If I bought one of them, would I eventually be able to use it when a new version of VCDS releases?
4. Would it have the exact same features as an original cable or will it be cut-down in terms of features?

Thanks for taking you time, have a wonderful day.

**mullcom** · 21st August, 2020, 08:34 AM

I am on the same page. New to this with vag-com . I have ELM327 and eobd1266 and kwp2000+ and op-com and scantool.net obd-link "BT" adapter

But after a bit of reading I realized this adapters seams not to going to work.

Try to read on the thread to find a good starting point to get understanding of this vcdl and vag-com.

If someone can be kind to point me in right direction on this journey.

Skickat från min SM-G973F via Tapatalk

**Tib82** · 26th August, 2020, 05:18 AM

I'm searching for the 20.4.x of CZ (SVO) of our beloved program

but I cannot download it from the official CZ site.
If anybody have it, please share it with me

Thanks!

**western6089** · 26th August, 2020, 08:05 PM

Hi, here is the download.
V 2020 CZ
https://ulozto.sk/file/18dx6UB3prRk/...x-2020-4-1-rar

**kaalis** · 27th August, 2020, 10:01 AM

20.4.2 RUS released

**Tomgnus** · 27th August, 2020, 12:15 PM

Hi i have https://www.obd2cartool.com/vip-link...86o4so84i9m7r7

And Kilomers 9.2 and VCDS 19.6.2 is it safe for me to update to the latest version of VCDS? or do i need to do some reflash the cable?

**heshamzn** · 31st August, 2020, 03:08 PM

The link for OBD2cartool DK members VIP offer is Down Why ?? i already ordered 5 peaces and pay for it
Why its Down ?

https://www.obd2cartool.com/vip-link...tubt40p5prjok5

**kaalis** · 1st September, 2020, 07:09 PM

NEZ 20.4.2 released

Originally Posted by heshamzn

The link for OBD2cartool DK members VIP offer is Down Why ?? i already ordered 5 peaces and pay for it

Out of stock, I suppose.
Check order status in your account.

**FoObPro** · 2nd September, 2020, 10:26 AM

Hello. Does someone have vcds 18.2.0 ROJ?

**sebage** · 2nd September, 2020, 10:38 AM

What you need, firmware for the interface or software?

**temusr** · 2nd September, 2020, 02:27 PM

Hello Everyone,
First I'd like to thank you for your help much; would you please give me a list of tools required to repair and where to get the dump file to program the atmega controller;

what happened to my cable was I thought a cloned cable an original one so, I went to ross tech website and downloaded the latest software ver 20 and ran it without any loader I was naive ; the cable gave status : Not plugged into car despite it was connected to obd connector of a Golf 6 car

the problem seems to me that an original software got the cable disabled/banned. I played with a couple of tools in order to undo what the original software has done; I programmed the FTDI USB interface but I couldn't get to the atmeg controller expecting it has a boot loader to program.

I ordered USBASP programmer from local dealer. But I need a road map; I know about lots of things now the atmeg is used to communicate to car and ftdi is usb controller i know about pinouts of the obd; I know about ftdi FTDI232RL which is my case MY GAL controller is PALCE

I have been searching, studying your forum but, I still confused and i need a roadmap/steps and dump/tools if it does not bother You.
1.jpg 2.jpg
Test VCDS USB Interface

Device : 1
Description : Ross-Tech HEX-USB
VID & PID : 0x0403FA24
FT_Chip ID : 0x9025AF2C

SW Version : 131.24
Loader ver. : 0.196, HP
Check Sum 1 : 0x8E01
Check Sum 2 : 0xB5FD
Firmware : unknown
Clone mark : !!!

SN : 0x808080281D818088

Test was completed successfully !
not plugged.jpg