VAG-COM/VCDS EVERYTHING

**hid3** · 3rd May, 2022, 09:48 AM

I'm glad he finally shut up, because there was a time when every 2nd post on this thread was his advertisement... Enjoy the silence comrades

**jan4** · 3rd May, 2022, 06:10 PM

that was exactly my idea !!

altough , now he has a large load on his shoulders to make the cables work .

**bendzji** · 3rd May, 2022, 06:22 PM

Originally Posted by PJD

Thanks for the reply,
After reading the destruction manual, I've decided its better that I don't try and modify my lead, I'd prefer to keep it intact in its current operational state which I can keep as a backup, and purchase another lead which is preferably already good to go, is there a pre-configured lead? which somebody could recommend I buy? and from a recommended seller? (A bit like is recommended in the Autocom thread, in the "Read me" file there is the recommended lead from the recommended seller for that particular software which I purchased last night, in the hope it will be less problematic)

If I have read right, will the HEX-V2 do the job needed straight out the packet? only job needed is the re-flash from VAGCOM_EEWriteLang.exe utility? which is a simple job right?

I have a similiar type of cable , just diffrent pcb color. It had bootloader disabled. It needed cutting line to stc chip and soldering icsp programeer. Working nicely since 2 years.

**hid3** · 3rd May, 2022, 08:53 PM

That poor LED has one leg missing?
Also, there was no need to solder the 4th wire (Vcc) to MCP chip. Just power up via OBD2 and it will do the job.

**bendzji** · 3rd May, 2022, 09:04 PM

Yes one leg is missing. I did the soldering as in readme of loader pack. Next time i will do as you write.

**StanNB** · 8th May, 2022, 12:54 AM

Could somebody please activate my license request?

I need it for an old V1 with loader 1.15.

Thanks so much !!

**elmer9** · 8th May, 2022, 12:17 PM

hi guys forgive me in advance if I ask you something that surely has already been said in previous posts, I wanted to ask you, a friend gave me this cable, without cd, I wanted to ask you if you can give me the software 16.9 .2, and if you think I should be updated. ... if so, how? if you can help me .. thanks a lot
vag1.jpg vag2.jpg

**StanNB** · 8th May, 2022, 12:29 PM

Originally Posted by elmer9

I wanted to ask you if you can give me the software 16.9 .2, and if you think I should be updated.

Try the search and u'll find all u need.

**MaTyyyspl** · 14th May, 2022, 11:59 AM

On newest version loader and vcds i get license revoked... Any solutions?

**Tomas003** · 14th May, 2022, 12:02 PM

Originally Posted by MaTyyyspl

On newest version loader and vcds i get license revoked... Any solutions?

Disconnect internet and reinstall software

Išsiųsta naudojantis SM-A325F Tapatalk 4 Lt

**StanNB** · 14th May, 2022, 12:42 PM

Originally Posted by Tomas003

Disconnect internet and reinstall software

And disable vciconfig.exe from internet, ingoing and outgoing, with a firewall. After that u can use internet again with VCDS.

**Lolo4321** · 18th May, 2022, 08:10 PM

Maybe Kolimer makes it for this v2

Im using V08.021.05 VII PLUS Loader works OK for me, here and there few little bugs.
VCDS 21.3.0.0

**Fabio89** · 19th May, 2022, 06:12 PM

Viiplusloader 08.22.05 Full + VCDS 22.3.1 a lot of bugs, security access doenst work as well.

**subzdarg** · 23rd May, 2022, 11:05 AM

Originally Posted by Fabio89

Viiplusloader 08.22.05 Full + VCDS 22.3.1 a lot of bugs, security access doenst work as well.

im useing 21.9 with 08.022.05 fw no issues soon as i use 22.3 or 22.3.1 nothing but issues also

**Gimse** · 26th May, 2022, 10:09 AM

Originally Posted by Fabio89

Viiplusloader 08.22.05 Full + VCDS 22.3.1 a lot of bugs, security access doenst work as well.

Yes, i confirm that there are code security access issues in English. If you use another language 21.9 with loader 08.22.05 everything is ok. Yesterday, 22.3.1 appeared in the other languages but I didn't have time to test to see if there are the same problems.