VAG-COM/VCDS EVERYTHING

[badrax]

VCDS 23.3.1 does not require a firmware upgrade (it will work with CB:4631) so VIIPlus loader for 23.3 will work but it will not be able to decrypt UDS messages.
In your scan log you will see something like this:

13697024 - Component Protection
U1100 00 [009] - No Basic Setting
[Tip-TNF 231499]

instead of:

13697024 - Component Protection
U1100 00 [009] - No Basic Setting
[Komponentenschutz keine oder falsche Grundeinstellung bzw. Adaption]
Confirmed - Tested Since Memory Clear

VCDS will of course know that you are missing the decrypt key and might do other strange things.

Every version of VCDS is using a different key that only a genuine interface can calculate.
The calculation is done by sending a MAC message to the external crypto chip and without this key it will be "impossible" to calc this response.
The response will have to be ripped from a genuine interface and hard coded into the VIIPlus firmware.
This is why VIIPlus loader need an update to fully work with VCDS 23.3.1

For VCDS 23.3.1 ENG the Challenge is:
0xFD, 0x9D, 0x98, 0x3B, 0xDF, 0x6B, 0x0E, 0x01, 0x01, 0x10, 0xEC, 0x79, 0x80, 0xB0, 0xEC, 0x76, 0xCE, 0x04, 0xC0, 0x01, 0xD8, 0x09, 0x85, 0x02, 0x09, 0x9E, 0x0E, 0x1E, 0x9D, 0x3C, 0x76, 0x27

and the response is:
0xED, 0x57, 0xB1, 0x21, 0xBC, 0xB0, 0x04, 0x72, 0xDE, 0x15, 0x02, 0xF3, 0x43, 0x79, 0x97, 0x10, 0x00, 0xCE, 0xE2, 0x6D, 0x30, 0x49, 0x0E, 0x1D, 0x46, 0xFD, 0xD6, 0xB9, 0xA9, 0x14, 0x3B, 0x87

[straian]

ok. Thanks. I will put back 23.3.0.

[StanNB]

VCDS 23.3.1 does not require a firmware upgrade (it will work with CB:4631) so VIIPlus loader for 23.3 will work but it will not be able to decrypt UDS messages.

Ask the Professional 👍

Btw: It seems that there are issues with Security Access in the EN VCDS since 22.9.0 up to 23.3.1. Its recommend to use the 32bit Version of VCDS on 64bit Windows, always with loader.

[heshamzn]

im about to do it is there any soft to flash it ? always got eeror when i try to connect usb can u send file to other stm 415 ? to update itWhatsApp Image 2023-05-06 at 01.02.37.jpgWhatsApp Image 2023-05-06 at 01.02.38.jpg

[TechMonkey]

Anyone have the 405 and 415 update files to program with ST-Link to work with 23.3?

[flyfvdi]

FLY will release new viiplusloader and new firmware to support VCDS V23.3.1 soon

[flyfvdi]

VCDS 23.3.1 does not require a firmware upgrade (it will work with CB:4631) so VIIPlus loader for 23.3 will work but it will not be able to decrypt UDS messages.
In your scan log you will see something like this:

13697024 - Component Protection
U1100 00 [009] - No Basic Setting
[Tip-TNF 231499]

instead of:

13697024 - Component Protection
U1100 00 [009] - No Basic Setting
[Komponentenschutz keine oder falsche Grundeinstellung bzw. Adaption]
Confirmed - Tested Since Memory Clear

VCDS will of course know that you are missing the decrypt key and might do other strange things.

Every version of VCDS is using a different key that only a genuine interface can calculate.
The calculation is done by sending a MAC message to the external crypto chip and without this key it will be "impossible" to calc this response.
The response will have to be ripped from a genuine interface and hard coded into the VIIPlus firmware.
This is why VIIPlus loader need an update to fully work with VCDS 23.3.1

For VCDS 23.3.1 ENG the Challenge is:
0xFD, 0x9D, 0x98, 0x3B, 0xDF, 0x6B, 0x0E, 0x01, 0x01, 0x10, 0xEC, 0x79, 0x80, 0xB0, 0xEC, 0x76, 0xCE, 0x04, 0xC0, 0x01, 0xD8, 0x09, 0x85, 0x02, 0x09, 0x9E, 0x0E, 0x1E, 0x9D, 0x3C, 0x76, 0x27

and the response is:
0xED, 0x57, 0xB1, 0x21, 0xBC, 0xB0, 0x04, 0x72, 0xDE, 0x15, 0x02, 0xF3, 0x43, 0x79, 0x97, 0x10, 0x00, 0xCE, 0xE2, 0x6D, 0x30, 0x49, 0x0E, 0x1D, 0x46, 0xFD, 0xD6, 0xB9, 0xA9, 0x14, 0x3B, 0x87

why you do not crack ross-tech vcds hex-v2 ?

[drdahmani2]

im about to do it is there any soft to flash it ? always got eeror when i try to connect usb can u send file to other stm 415 ? to update itWhatsApp Image 2023-05-06 at 01.02.37.jpgWhatsApp Image 2023-05-06 at 01.02.38.jpg

it's difficult (only few knows )
because the debug interface (which you are connecting your pins) is diasabled by the firmware (set to RDP2_)

[TechMonkey]

Asked same question

[flyfvdi]

You should crack ross-tech vcds hex-v2 firmware and software, you're the one to be admired

[miouser]

someone already success try to unlock SFD on MQB2020 with hex-v2 (viiplusloader)?

i found that sfd tokens can be generated on vaglogins.com up to 5 dollars

[badrax]

why you do not crack ross-tech vcds hex-v2 ?

What makes you think I have not already done so

[flyfvdi]

What makes you think I have not already done so

yes, you can not crack ross-tech vcds hex-v2, the whole world knows it. because you can not directly use the original ross-tech vcds hex-v2 firmware and vcds software.

can you prove it to us ?

you are fluky only.

your technique is just so so.

everyone know chinese stm 415 vcds hex-v2 is crap.

[badrax]

yes, you can not crack ross-tech vcds hex-v2, the whole world knows it.

Not the whole world but most of the world

because you can not directly use the original ross-tech vcds hex-v2 firmware and vcds software.

How do you know that you can't use the firmware directly?
Do you have it and are unable to use it?

[StanNB]

yes, you can not crack ross-tech vcds hex-v2, the whole world knows it. because you can not directly use the original ross-tech vcds hex-v2 firmware and vcds software.

can you prove it to us ?

you are fluky only.

your technique is just so so.

everyone know chinese stm 415 vcds hex-v2 is crap.

Sorry fly, but you know nothing! Last year we had contact by team viewer in case of a problem with VII Plus and VCDS. And your solution? There is no! You don’t have the skills to engineer anything! Who build’s the Loader? Is it you? Ask your russian friends!

People with knowledge of RT firmware (they are rare) knows that the 415 is the best PCB for the VCDS. And yes, my 415 runs with 1:1 RT FW, without any loader and without any issues! VII Plus is crap!!

So pls stop talking sht about people who have much more skill’s then u have!